New Product

 

New Product Announcement: The BFNG10 – ESD Ionizing Gun

October 16, 2019

Transforming Technologies is pleased to announce we have added the BFNG10 ESD ionizing gun to our line of ionizers.

BFNG10 Ionizing Blow Off Gun

The BFNG10 is a high-performance ESD ionizing gun perfect for a wide variety of industrial applications.  The BFNG10 provides excellent balance and rapid charge decay for secure ESD workstation protection.

The BFNG10 ionizing gun combines portability, fast static decay rates, excellent balance and low compressed air consumption to efficiently remove static and contaminates in the Semiconductor, Electronic Assembly, Medical Device, Optics, Automotive and Pharmaceutical markets.

The BFNG10 works twofold: as a forceful blow off gun that quickly removes particulate from surfaces and as a neutralizer to remove the static charges responsible for the attraction of contaminants to product surfaces.

The gun body is lightweight but durable, and features a light-touch trigger, making it comfortable for extended use. A metal hanger is provided for easy mounting.

BFN series AC ionizers from Transforming Technologies create a dense and well-balanced ionization current. They are unique in their ability to deliver fast decay times with low offset voltages. Continuous balance and decay protection is assured by the reliable AC design.

Specifications:

  • Designed for long-term use in an electronics production environment.
  • Size: 17″x22″
  • Sold in pack of five posters
  • Made in the United States of America

Product information, data sheet and images can be found here:

 

WB3000: Magnetic ESD Wrist Straps

June 5, 2019

WB3000 Magnetic Wrist Strap Sets

A premium one-size-fits-all wrist strap set with a magnetic connection between the wrist strap and coil cord.

The WB3000 Series is a high quality adjustable anti static wrist strap with a 8′ or 12’ coil cord. The snaps are specially designed magnets which creates a superior electrical connection between the wrist strap and coil cords. The magnet snaps eliminate the intermittent failures and wear and tear of traditional snap and spring connections.

Specifications:

  • One-size-fits-all hypoallergenic fabric wrist strap set
  • Specially designed magnetic snaps provide a superior electrical connection between the wrist strap and coil cords.
  • The magnet snaps eliminate the intermittent failures and wear and tear of traditional snap and spring connections.
  • Dual-Wire conductor provides redundancy:  Even if one dual-wire wrist strap wire is severed, the operator has reliable path-to-ground with other wire.
  • Coil Cord: 8ft or 12ft long

Application and Usage
Semiconductor, SMT Assembly, Disk Drive. The WB3000 series is recommended for use with Transforming Technologies’ Resistance Ranger Constant Monitors and are compatible with most manufacturers’ monitors*.

More Information can be found at The WB3000 Series Wrist Strap Product Page.

 

New Product Announcement: ESD Cut Resistant Gloves.

November 1, 2018

Transforming Technologies, a supplier of a wide range of ESD products, has added the StaticCareTMGL2500 Series ESD Cut Gloves to their line of ESD Apparel.

Transforming Technologies, a supplier of a wide range of critically important ionization, matting, grounding, test equipment and ESD apparel for protecting static sensitive electronics, has added the Staticare™ GL2500 Series ESD Cut Gloves to their line of high-quality ESD Apparel. The Staticare™ GL2500 Series ESD Cut Gloves combine powerful cut resistance, comfort, and uniform ESD protection into one superior performing glove. The gloves are certified ANSI Cut Level 2 while maintaining softness, flexibility, and comfort.

ESD Protection
The Staticare™ GL2500 series gloves provide superior ESD protection because conductive carbon threads are combined with the cut resistant fibers GL2500-esd-cut-resistant-glove-with-knife-2-level-2to provide uniform static decay rates. Typical surface resistance is less than 10^7 ohms per ANSI/ESD SP15.1

Cut Protection
The Staticare™  ESD Cut Gloves are constructed with 18-gauge Ultra High Molecular Weight Polyethylene (UHMWPE) thread which provides great cut protection, outstanding abrasion and tear resistance. The gloves are rated ANSI Cut Level 2, which offers a basic level protection against cuts or punctures.

About Transforming Technologies
Since 1998, Transforming Technologies has provided a wide range of unique and outstanding products to detect, protect, eliminate and monitor electrostatic charges. Transforming Technologies provides comprehensive knowledge of electrostatic issues, effective solution-oriented products, and outstanding, friendly service. We specialize in:

Headquartered in Toledo, OH, USA, Transforming Technologies offers a wide range of critically important ESD products for protecting static sensitive electronics. Our products are key tools used by industries to assure an effective static control program.

Contact:
Sales and Marketing
Transforming Technologies
419-841-9552
sales@transforming-technologies.com
www. transforming-technologies.com

Bemcot M3II Low Linting Anti-Static Cleanroom Wipers

BEMCOT M-3 static dissipative cleanroom ESD wipers are suitable for nearly all manufacturing and optical cleaning applications.

Bemcot wipers are for quick and easy wiping in cleanrooms, automotive manufacturing, electronics screen printing and other working environments that demBemcot M3IIand the lowest levels of lint and particles. BEMCOT is characterized by its low particle generation, high absorbency, high purity, high chemical resistance, high heat resistance, anti-static, ecoefficiency, enabling the high level of performance required for wipers for cleanrooms.

Bemcot wipers can be used in various industries such as semiconductor, optical, medical, cosmetics, food & beverage, printed circuit boards, building maintenance, automobile, aircraft, LCD, magnetic tapes, oil, tools, equipment, glass, optics, etc.

Features

  • Made of proprietary 100% filament rayon that absorbs 13 times its weight in liquid
  • Nonwoven, soft, and low-linting wiper with excellent antistatic and heat resistance properties
  • No binders—safe to use with different solutions
  • Designed for use on sensitive electrical equipment, and in compact disk and magnetic tape industries
  • Apertured surface promotes particle removal
  • Static dissipative ESD wipes for all electronic manufacturing and optical cleaning applications
  • 100% knitted polyester
  • No carbon or metal fibers
  • Less than 100 volts tribo-charge
  • Good solvent resistance, lint-free
  • Complies with ANSI/ESD S20.20 ( per ANSI/ESD S11.11 & ANSI/ESD DS11.12 )

Read about Bemcot Wipers in Electronics Screen Printing and Bemcot Wipers in Automotive Processes.

For price and availability on the BEMCOT M-3 wipers or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email info@transforming-technologies.com.

 

New Product Announcement: The SRM330 Lightweight Travel Surface Resistance Meter Kit

March 10, 2016

The SRM330 Lightweight Travel Surface Resistance Meter Kit

The SRM330 Surface Resistance Meter is the ultimate travel kit for testing materials for electrical re-sistivity/resistance according to EOS/ESD, CECC, ANSI, ASTM test procedures. The 9V battery powered SRM330 is equipped with built-in parallel electrodes for quick surface resistance measurements (table matting, floor matting, etc.) and includes two lightweight “travel” electrodes that eliminate the cumbersome weight of standard kits. When pressed, the travel electrodes simulate the 5lbs of pressure necessary to measure resistance point-to-point (RPP) or resistance-to-ground (RTG).

SRM330-surface-resistance-meter-full-kit

Features include:

  • Easy-to-read color coded readout screen
  • Two lightweight travel electrodes
  • Built in resistivity probes
  • Automatic test voltage selector
  • Carrying case

travel-probes

The SRM330 meets periodic test requirements per Compliance Verification ESD TR53 and conforms to ANSI/EOS/ESD (S4.1, S7.1, S12.1, S2.1).

For price and availability on the Ranger series constant monitors or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email info@transforming-technologies.com.

 

Introducing Transforming Technologies Resistance Ranger Constant Monitors

February 29, 2016

Resistance Ranger Dual Wire Constant Monitors

The Resistance Ranger Constant Monitors are an accurate and cost effective system to ensure that an ESD workstation station is grounded. The system continually monitors the resistance levels of wrist strap sets and alarm to indicate a failure.  The system uses superior dual wire wrist straps that provide two paths-to-ground to ensure ESD protection. The Rangers can also monitor the ground connection of the ESD worksurfaces and grounded tools.  All three models have conductive cases and use an ultra-low voltage sensing current. The Resistance Rangers are designed for use in the most sensitive environments and processes.

 

Three Models:       


RangerOne™ – p/n CM1601
:   
This model is simplest and most economical constant monitor. It monitors the resistance of 1 person/wrist strap. Also provides a second unmonitored ground jack.

CM1601-resistance-ranger

RangerTwo™ – p/n CM1602:   
This model monitors the resistance level of 1 person/wrist strap and the worksurface ground. Also provides a second unmonitored ground jack.

CM1602-resistance-ranger(2)

Ranger™ – p/n CM1600:   
Ranger is the premiere work station grounding system available. The Ranger monitors two wrist bands, two work surfaces, and two auxiliary grounds simultaneously. Also provides two additional unmonitored ground jacks .The Ranger has an output to hookup to an external alarm. The monitor is enclosed in a stainless steel conductive case.

CM1600

Calibration
The Ranger Series is factory calibrated and does not require annual recalibration.  It is recommended to verify the monitors are in proper working order with the CM2015PV periodic verification unit.

Accessories
CyclopsTM Operator Presence Check – CMREMOTE-IR
The Cyclops is an infrared sensor that causes the monitor to alarm when an operator approaches the workstation without connecting their wrist strap. The alarm continues until compliance is achieved.

CP3000 Wrist Strap Parking Station
Provides a jack that will allow an operator to disconnect and leave the dual conductor cord at the workstation without the wrist strap monitoring system alarm sounding. For use with mono plug coil cords.

Superior Technology
Resistance based monitoring is the only true wrist strap monitoring technology available.  Single wire systems simply detect that a person is wearing a wrist strap and put the monitor into an unalarmed state.  Resistance monitors actually measure the resistance of the wrist strap in combination with the person and alarm if the product exceeds preset levels. This accurate measurement ensures reliability.

Compatible Wrist Straps
WB2800 Series Two Snap, Dual Wire Wrist Bands
WB2695 Series One Snaps Dual Wire Wrist Bands
WB5000 Series Mono Plug Dual Wire Metal Wrist Bands
WB7000 Series Mono Plug Dual Wire Fabric Wrist Bands
*Most Standard Dual Wire Wrist Band Sets are Compatible with the CM1600, CM1601 and CM1602

For price and availability on the Ranger series constant monitors or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email info@transforming-technologies.com.

 

 

New Product Announcement: GrooveSTAT ESD Conductive Floor Runner

February 23, 2016

Transforming Technologies is proud to announce the addition of the GrooveSTAT ESD Conductive Floor Runner to our line of ESD Products.

FM10-grooveSTAT-esd-floor-runner

Transforming Technologies GrooveSTAT Conductive Rubber Matting provides the electrical properties specified by ESDA standards for floor mats. A ribbed emboss provides a non-slip surface that provides excellent traction and allows the mat to be easily cleaned. The ribbed matting is also very resilient, allowing it to stand up to heavy foot traffic while still maintaining its ESD protection. The material also offers moderate chemical resistance. The matting is 1/8″ thick matting is available in 4’x32′ rolls and an assortment of lengths.For use with ESD footwear such as heel grounders and sole grounders.

Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1

Benefits & Features of the Transforming Technologies GrooveSTAT ESD Conductive Floor Runner:

  • 100% conductive rubber: 10^3-10^5
  • Corrugated v-groove surface allows for a superior traction and can easily be cleaned
  • Available in rolls or an assortment of lengths.

Specifications of the Transforming Technologies conductive GrooveSTAT ESD Conductive Floor Runner:

  • Point-to-point resistance: 10e3-10e5
  • Mats or full rolls for floor runners
  • Meet or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1

conductive-v-groove-rubber-mat

 

For price and availability on the FM10 GrooveSTAT ESD Conductive Floor Runner or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email info@transforming-technologies.com.

Posted in New Product | Comments Off
 

New Product Announcement: ComfortTREAD Diamond Plate Anti-Fatigue Runners

February 9, 2016

Transforming Technologies is proud to announce the addition of the ComfortTREAD Diamond Plate Anti-Fatigue Runner to our line of ESD Products.

ComfortTread-anti-fatigue-floor-runner

ComfortTREAD diamond-plate ESD anti-fatigue mats keep your workers comfortable and your ESD sensitive equipment safe. The 100% conductive rubber mats are embossed with raised diamond-plate treads for superior traction and feature wide beveled borders to promote safety. A fully molded honeycombed cell design absorbs shock and cushions the feet from constant contact with hard surfaces. The mat will not separate, bubble-up, ripple, tear, compress or lose resiliency. Available in interlocking sections which can be quickly dismantled to make moving and cleaning easy. Two FM9E connected creates a 2.5′ x5′ workstation mat or you can pair the two FM9E with any number of FM9C pieces to create a runner in 30” increments. For use with ESD footwear such as heel grounders and sole grounders.

Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1

Benefits & Features of the Transforming Technologies ComfortTREAD ESD Matting:

  • 100% conductive rubber: 10^3-10^5
  • Diamond-plate treads for superior traction
  • Interlocking sections create a 5’ long work-station mat or runners in 30” increments.
  • Beveled borders for safety

Specifications of the Transforming Technologies conductive ComfortTREAD ESD Matting:

  • Point-to-point resistance: 10e3-10e5
  • Inlocking mats for floor runners
  • Meet or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1
ComfortTREAD Anti-Fatigue Interlocking Piece

ComfortTREAD Anti-Fatigue Interlocking Piece

ComfortTREAD Anti-Fatigue End Piece

ComfortTREAD Anti-Fatigue End Piece

For price and availability on the FM9 ComfortTREAD Anti-Fatigue Floor Runners or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email info@transforming-technologies.com.

 

New Product Announcement: VinylSTAT ESD Chair Mats & Runners

April 8, 2015

Transforming Technologies is proud to announce the addition of the VinylSTAT ESD Chair Mat and Runners to our line of ESD Products.

VinylSTAT Chair Mats

Transforming Technologies VinylStat FM7 chair mats are the perfect solution for grounding chairs in an office or manufacturing environment. It is made of a rigid conductive vinyl that protects carpets from wear and tear while providing a path-to-ground for static charges.

Features:
The FM7 mats are a single layer of conductive vinyl, 0.090” thick, die cut to fit under typical desks. Surface resistivity is 10^3 – 10^6. Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1.

Benefits of the Transforming Technologies VinylStat FM7ESD Matting:

  • Die cut rigid conductive matting allows chairs to be grounded
  • High levels of flexibility
  • Mat can be used in areas subjected to heavy traffic, most liquids & withstand wear and tear.

Specifications of the Transforming Technologies conductive Comfort GEL ESD Matting:

  • Surface resistivity is 10^3 – 10^6. Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1.
VinylSTAT Conductive Runner

VinylSTAT Conductive Runner

VinylSTAT Chair Mat

VinylSTAT Chair Mat

 For price and availability on the FM7 Conductive Runners or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email info@transforming-technologies.com.
 

New Product Announcement: TileSTAT Interlocking Anti-Fatigue ESD Tiles

February 25, 2015

Transforming Technologies is proud to announce the addition of the TileSTAT Interlocking Anti-Fatigue ESD Tiles to our line of ESD products.

TileSTAT Interlocking ESD Rubber Anti-FatigueTiles

TileSTAT Interlocking ESD Rubber Anti-FatigueTiles

TileSTAT Interlocking Rubber Anti-Fatigue ESD Tiles are a heavy duty, durable safety mat constructed of conductive nitrile rubber for use in even the harshest environments. TileSTAT mats feature a solid pebble embossed surface for improved traction, making this a good choice as a safety mat. The 3ft x 3ft interlocking mats fit together like a puzzle to create custom ESD workstations or complete room systems. The mats can be quickly dismantled to make moving and cleaning easy. Optional beveled borders can be added to the mats.


Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1

Benefits & Features of the Transforming Technologies TileSTAT Anti-Fatigue ESD Tiles:

  • 100% conductive rubber: 10^4-10^6
  • Solid top design for use in wet or dry locations
  • Interlocking sections snap together to easily create custom workstations
  • Optional yellow beveled borders for safety

Specifications of the Transforming Technologies conductive TileSTAT Anti-Fatigue ESD Tiles:

  • Point-to-point resistance: 10^4-10^6
  • Surface: Solid Top Pebble Emboss
  • Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.
TileSTAT Interlocking Anti-Fatigue ESD Tiles

TileSTAT Interlocking Anti-Fatigue ESD Tiles

TileSTAT Interlocking Anti-Fatigue ESD Tiles (Underside)

TileSTAT Interlocking Anti-Fatigue ESD Tiles (Underside)

TileSTAT Interlocking Anti-Fatigue ESD Tiles w/ Yellow Beveled Edges

TileSTAT Interlocking Anti-Fatigue ESD Tiles w/ Yellow Beveled Edges

 

 

 

 

 

 

 

For price and availability on the TileSTAT Interlocking Anti-Fatigue Tiles or for information on any products in Transforming Technologies full line of ESD products, please call 419-841-9552 or email info@transforming-technologies.com.

 

Translate »