Cleanroom
TX40BE Series – ESD Soft Sole Boot with Ground Ribbons (Groundable)
TX4000 ESD Grid Fabric—99% Polyester / 1% Carbon Three layer ESD rubber soft sole (non-marking rubber inside and outside) Hypalon side wall Combination 1” elastic and webbing at top of...
More info
TX40BH Series – ESD Hard Sole Boot with Ground Ribbons (Groundable)
TX4000 ESD Grid Fabric—99% Polyester / 1% Carbon PSTAT ESD Hard Sole with twill reinforcement Combination 1” elastic and webbing at top of closure with snap adjustment Replaceable 18” internal...
More info
TX40CR Series – ESD Cleanroom Coverall
TX4000 ESD Grid Fabric—99% Polyester / 1% Carbon Raglan sleeves with ESD knit cuffs for body contact Military collar Zipper closure with snaps for easy gowning Seams sewn with conductive...
More info
TX40FR Series – ESD Cleanroom Frock
The TX4000 Series ESD Cleanroom Frock is Designed for Controlled Environments Such as Cleanroom That Are Concerned with Static and ESD Damage TX4000 ESD Grid Fabric—99% Polyester / 1% Carbon...
More info
TX40HF Series – ESD Cleanroom Hood with Ground Snaps
TX4000 ESD Grid Fabric—99% Polyester / 1% Carbon Open face with snap-under-the-chin closures Two vertical snaps at each side of temples Vertical and horizontal snaps in back and shoulders Rolled...
More info
WBAS28MET Cleanroom ESD Waste Basket: 28 Quart (7 gallon )
Ideal for Cleanrooms and other controlled environments 7-gallon capacity Made with permanently conductive stainless steel Typical point-to-point resistance: 10^2 – 10^3 ohm...
More info
TX4000 ESD Cleanroom Garment System
The TX4000 ESD-Safe Integrated Cleanroom Wear is Designed For Use in Cleanrooms and Controlled Environments When Contamination Control and ESD Protection Is Paramount ESD Groundable Garment System: Electrical Continuity From...
More info
ESD Cleanroom Frock – White, Light Blue, and Navy Blue – ESD Knit Cuffs
ESD Safe Class 1000 Cleanroom Frock Extremely Durable Cleanroom Fabric Contains a Conductive Grid That Reduces Static Generation Full-length lab coat – Covers More Clothing ESD Knit Cuffs Navy Blue,...
More info
FG3900 Series – Nomex® Static Safe Cleanroom Hot Gloves – 16″
Have static protection and high heat protection in a clean room compatible glove Resists heat up to 572F (300C) Made with heat resistance Nomex® fabric with ESD carbon yarns Cleanroom...
More info
FG2600 Series – Nomex® Static Safe Cleanroom Hot Gloves – 11″
Have static protection and high heat protection in a clean room compatible glove Resists heat up to 572F (300C) Made with Nomex® Fabric that is inherently flame resistant, high-temperature fiber Compatible...
More info
FG6200 Series – Nomex® Static Safe Cleanroom Hot Sleeves
Resists Heat Up to 572F Made with Nomex® Fabric Cleanroom Compatible Static Dissipative...
More info
IDP-STAT® MT5500 Series: Cleanroom ESD Table Mats
Extremely durable ESD mat that protects your sensitive items as well as your work surface Compatible with cleanrooms: Ultra-low outgassing, non-VOC, non-blooming and No Particle Generation Made with IDP-STAT Alloy –...
More info
FM66036BK ComfortGEL Cleanroom ESD Anti-Fatigue Mats – 3’x5′ – Black
Made with rubberized gel foam for maximum softness and cushioning Exceptional comfort and long-term performance Static dissipative Specially formulated antimicrobial and antibacterial material to promote cleanliness Washable to clean room level 100...
More info
CTM Series – Cleanroom Sticky Mat
Control contamination from footwear in your workplace with cleanroom sticky mats Keep controlled environments / sanitary-sensitive areas free and clear of foreign substances Remove and trap unwanted dirt, dust and...
More info
CTM Series – Cleanroom Sticky Mat Aluminum Frame
Moveable, Secure Base for Tacky mats Anodized Aluminum Edges With Beveled Edges, Non-Skid Bottom For Traffic Clean Finished Look to Improve Tacky Mat Appearance Keep Controlled Environments Free and Clear...
More info
CTM Series – Cleanroom Sticky Mats
Control contamination from footwear in your workplace with cleanroom-safe sticky mats Used on entryways, walkways, high-traffic and other areas where particle contamination is to be controlled. Keep controlled environments /...
More info
Sticky Mat Mounts
Sticky Mat Mounts are for use with cleanroom-safe sticky mats in areas that do not allow adhesion directly to the floor surface. The mounts are constructed of a hard, rigid, polystyrene...
More info
FM62436BK ComfortGEL Cleanroom Gel Foam Anti-Fatigue Mats – 2’x3′
Made with rubberized gel foam for maximum softness and cushioning Exceptional comfort and long-term performance Static dissipative Specially formulated antimicrobial and antibacterial material to promote cleanliness Washable to clean room level 100...
More info
FM62036BK ComfortGEL Cleanroom Gel Foam Anti-Fatigue Mats – 20″x3′
Made with rubberized gel foam for maximum softness and cushioning Exceptional comfort and long-term performance Static dissipative Specially formulated antimicrobial and antibacterial material to promote cleanliness Washable to clean room level 100...
More info
DC1185.IDP – Permanently Dissipative ESD Sheet Protectors – Nine Hole Punch
Made with permanently dissipative IDP-STAT® PVC film Lightly embossed to reduce glare Resistant to print transfer Yellow stripe with ESD identification Typical Surface Resistivity: 10^9 – 10^10 9-Hole Punch.ectors – Nine Hole...
More info
IDP Stat ESD Badge Holder
The IDP-STAT® ESD Badge Holders are an excellent way to shield employee badges, guest passes, or key cards. Permanently Dissipative – ESD Properties will Never Expire Resistance: 10^9-10^10 Hot Stamped...
More info
WP8200 – Cleanroom Safe ESD Inspection Wiper – 9″x9″
Black Anti-Static Cleanroom Wipers are perfect for the cleaning and final inspection of sensitive components in controlled environments. Visually inspecting the wipe is the quickest and easiest way to check...
More info
WP7200 – Cleanroom Safe ESD Polyester Wiper – 9″x9″
Ideal for wiping exterior areas of products in ESD-sensitive areas as well as cleaning of process tools and other equipment. Made out of 100% continuous polyester filaments with conductive carbon...
More info
BEMCOT M-3 – Static Dissipative Cleanroom Wipers
BEMCOT M-3 wipers are for quick and easy wiping in cleanrooms and other working environments that demand the lowest levels of lint and particles Made out of cotton into a...
More info
WP6200 Static Dissipative ESD Wipers
ESD & CLEANROOM SAFE: Static dissipative ESD wipes are perfect for all electronic manufacturing and optical cleaning applications PREMIUM MATERIALS: Constructed with 100% knitted polyester that are continuously filamented that...
More info
SC1207C – Disposable ESD Shoe Covers with Skid Resistant Bottoms
Disposable ESD Shoe Covers with Skid Resistant Bottoms are an effective line of defense that will keep your devices, products, and environments safe from static damage and contamination from foot...
More info
SC50BS Series – ESD Washable Cleanroom Shoe Covers
The SC50BS Series: ESD Washable Cleanroom Shoe Covers with ESD Rubber Soles and Conductive Grounding Ribbons are an economical way to maintain cleanliness and ESD protection in controlled in environments...
More info