ESD Workstation Kits - Dual Wire CM1602

• Complete ESD Workstation Kit • Monitors One Dual Wire Wrist Strap, and One Work Surface • Two Layer Rubber: Excellent Resistance to Hold Solders, Soldering Irons and Most Solvents • Includes Grounding Hardware and Wrist Strap • Kit Meets or Exceeds Requirements of ANSI/ESD S20.20
Request Quote
Part Number: TTB2A-23RB
Data Sheet

A ESD Workstation Kits with a Dual Wire Constant Monitor, Work Surface and Wrist Straps

Work Surface

The 4500 series ESD control mats from Transforming Technologies are made of a durable 0.080”thick rubber. A conductive layer backs the static dissipative top layer that creates outstanding electrical performance characteristics. The 4500 series offers excellent resistance to hot solders, soldering irons and most solvents. Our cut mats are packaged individually with 10mm snaps and a common point ground cord. Available in nasa blue, royal blue, green and gray colors.

RangerTWO Dual Wire Constant Monitor
The RangerTWO constant monitor provides continuous protection against failing dual wire wrist straps and a ESD work surface. A constant pulse of an ultra-low voltage signal measures the electrical re-sistance of the wrist band and work surface and alarms if there is a problem. The RangerTWO saves time by eliminating the time consuming testing of grounding products. The system uses special dual wire wrist band sets that contain two independent elements which provide fail-safe protection. The series can be used with most common dual wire wrist straps available.

Grounding: Wrist Strap and Hardware
Each monitor uses a dual wire wrist strap sets such as the WB7000 from Transforming Technologies, although other compatible wrist strap sets may be substituted. Dual conductor wrist straps enable efficient, accurate resistance monitoring and grounding redundancy.