SPARTAN MAX CM330

$299.30
  • Continuously Monitors One Wrist Strap and One Work Surfaces
  • Built-in Relay Terminal to Connect to External Locks, Signals, Lights etc.
  • Alarms When A Person is Sensed and Not Grounded By A Wrist Strap
  • Compatible with Standard Single Wire Wrist Straps & Most ESD Mats
  • Park Button and Park Snap
  • Factory Calibrated; No Adjustments or Annual Recalibration
Request Quote
Part Number: CM330
Categories: Constant Monitors,
Tags:

The Spartan Max CM330 Constant Monitors provide ongoing testing of single wire wrist straps and ESD worksurfaces.

The Spartan MAX CM330 not only eliminates time consuming wrist strap testing, it removes the danger of wrist straps failing during a shift and possibly expos-ing highly sensitive materials to static. Both audible and visual alarms signal when the wrist strap, worksurface or ground fail. A Park button and Park Snap is used to eliminate false alarms at disconnect.
Enclosed in a durable metal case with built in mounting brackets, the moni-tors can be installed underneath table tops to save work space. The CM330 monitors meet or exceed the recommendations of ANSI ESD S20.20.

Max ESD Protection with an Operator Sensor and Relay

The CM330 ensures ESD protection with an infrared Operator Presence Sen-sor that will trigger the alarm if a person is detected and not connected to the monitor. A built in relay terminal activates during a failure which can be used to trigger an external signal such as a light tower, buzzer or power switch.

Capacitance Technology

The CM330 sends out a signal through the wrist strap that detects the capaci-tance of the person and ground. When both are present, the monitor goes into an unalarmed state. If the electrical connection to the person or to ground should fail, the circuit will go into the alarm state to signal there is a problem.

Calibration / Verification

The CM330 monitors are designed to be adjustment free. Annual calibration is not necessary because the devices are a fixed system. If, however, your quality program requires testing, the CM330PV verification tool is available to verify that the monitor is functional.

Single Wire Constant Monitor with Relay

The SPARTAN MAX Continuous Monitor features a built-in relay terminal that can be integrated with electronic locks, lights, buzzers, etc. The relay will activate when a failure is reported by the Continuous Monitor.

 

Transforming Technologies offers two stock options:
• CM-SIREN – A light tower with Green & Red Lights
CM-RELAY-IOT – A relay controlled power strip that can control power to your workbench/tools based on the status of your con-stant monitor. A single logic input signal controls one high-current SPDT AC relay. This one relay trigger signal switches three AC outlets simultaneously using a single-pole double-throw relay. One outlet normally is on. Two are normally off. A fourth outlet is unswitched. All outlets are protect-ed against surges and over-loads. The relay can also be controlled by an AC input voltage of 12 to 120VAC. No changes or jumpers are required.