Warmbier METRISO® B530 ESD Audit Kit

Kit that includes the relevant test instruments and equipment needed to perform ESD audits
  • Measure electrostatic fields
  • Measure surface resistance
  • Analyze ionizers performance
  • Evaluate packaging materials
  • Evaluate garments
  • Measure flooring, work surfaces and furniture resistance
  • Measure temperature and relative humidity
Request Quote
Part Number: 7110.B530.SET
Categories: Warmbier Products,
Data Sheet

The Warmbier METRISO® B530 ESD Audit Kit is a Complete Kit for Testing and Evaluation of an ESD Control Program

The METRISO® B530  ESD-Audit-Kit includes the relevant test instruments and equipment needed to perform ESD audits according to ANSI ESD.2020  and IEC 61340-5-1 and for qualification / verification of ESD control elements. The kit is built around the METRISO® B530 digital high resistance meter.  It can take resistance measurements of 1K Ohm  – 199kOhm


  • Evaluate packaging materials
  • Evaluate garments
  • Measure flooring, work surfaces and furniture resistance
  • Measure electrostatic fields
  • Measure temperature and relative humidity
  • Analyze ionizers performance



Metriso B530 - Part Number 7100.B530.MK

METRISO B530 Resistance Testing Meter

Take quick and accurate ESD measurements of materials with this high resistance testing kit.

The Metriso® B530 test kit efficiently measures a wide resistance range and is suitable for point-to-point, surface and resistance-to-ground measurements.  The Metriso® B530 can measurement range is from 1kOhm to 199 GOhm. The Metriso® B530 test kit includes a digital high resistance test meter, two disc probes, an extension handle for floor measurements, a hand-held probe with connecting cable, and a conductive carrying case fitted with dissipative pink foam.






SRM110 Pocket Surface Resistance Meter

Quickly and accurately take resistance measurements with the Warmbier SRM110.  The LED readout will report the resistance in powers of 10 (example 10^10) and indicate if the surface is Insulative, Conductive or Dissipative.

This Wolfgang Warmbier SRM 110 uses parallel electrodes and concentric rings to accurately measure RTT, RTG, or resistivity for periodic verification, factory audits or test lab evaluation of the product. This meter is designed to verify incoming materials such as floor mats, table mats, bins and shelving in static controlled areas. Work surfaces, bags, wrist straps, footwear, packaging materials, garments, and ESD chairs can also be tested with the device.

EFM51 Static Field Meter

EFM51 – Static Field Meter with Charge Plate Accessory

The EFM51 is a full-featured hand-held field meter used to perform static surveys and evaluate charge accumulation in electronic manufacturing and in industrial operations. The EFM51 measures static voltages within ±20kV (20,000V) with a microcontroller that calculates the field strength (V/m) with a pre-selected distance (1cm, 5cm, 10cm and 20cm). Results are displayed via a 12 digit alphanumeric LCD screen. Two LED guide ring lights help position the field meter at the right distance from a charged test object.

Charge Plate Accessory Kit For Testing Ionizers

EFM51 is supplemented by the EFM51.CPS “Charge Plate Set” which is used to check and verify ionizer efficiency and offset voltage (balance). The kit measures static decay times from +/- 1.000volts to +/- 100volts.  The kit includes a 6″ metal plates and battery powered charger.

The EFM51 meets periodic test requirements per Compliance Verification ESD TR53 and conforms to ANSI/EOS/ESD (S4.1, S7.1, S12.1, S2.1).

Rolling Metal Case for the Audit Kit

The kit includes a metal rolling case to house all of your ESD test equiptment.  The kit includes wheels and a telescoping handle.  All of the equipment fits into die cut foam that holds everything in place.


Rugged aluminum case with conductive foam inserts and ESD symbol
Upper compartment with a flap with Certificate of Compliances for all of the Equipement
Removable, telescopic handle with castors
Dimensions: 575x490x250 mm














Concentric Ring Probe for Testing ESD Packaging and More!

The 7220.880.SET concentric ring probe is used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements.

The Concentric Ring Probe (Ref: ANSI/ESD STM11.12) can measure the volume resistance of planar materials using a flat conductive metal plate (included).

The Concentric Ring Probe may be used for the resistance measurements of ESD packaging including static shielding and other bags.  The full part number is 7220.880.SET

Concentric Ring Probe for Testing ESD Packaging and More!

Designed to test point-to-point (RTT) and point-to-ground resistance (RTG) in accordance with ESD Association Standards. The probe can be used to make measurements on floors, mats, workbenches, garments, seating or any other flat surface where the resistance between two points is required.

Additional Accessories:

Grounding Plug
8 socket grounding box
15′ floor mat testing cable
Insulative Plate
Metal plate with 4mm snap
Ring probe
Hand probe