CP1518 Common Point Ground, 15ft Long, with a 10mm Male Snap, 1 Meg Resistor

$0.00
  • A versatile Common Point Ground Cord that connects multiple aspects of an ESD workstation to ground.
  • Equipped with two standard banana jacks - Grounds up to two operators at the same time
  • Molded head has a 3/8" male snap for worksurface attachment
  • Length: 15ft ground wire
  • Connection to Ground: A 1/8" (#10) ring terminal attaches to the center screw of an outlet or other ground points
  • Meets or exceeds requirements of ANSI/ESD S20.20 and ANSI/ESD S-6.1.
Request Quote
Part Number: CP1518
Tags:
Data Sheet

CP1518 ESD Common Point Ground Cord is a versatile 15ft long Ground Cord that connects multiple aspects of an ESD workstation to ground.

Transforming Technologies CP1518 common point ground cord offers the common point ground required by ANSI/ESD S-6.1 and ANSI/ESD-S20.20. The CP1518 common point ground are standard with two banana jacks to ground two wrist straps, a 10mm male snap, and a 1 meg resistor. The CP1518 includes a 15’ long black cord made with 7 strand tinsel wire to #10 ring terminal. It is also available with a large O-ring for military applications (CP1518BO) or with a bulldog clip and female snap (CP1518BD) for field service mats.

Meets or exceeds requirements of ANSI/ESD S20.20 and ANSI/ESD S-6.1.

  • CP1518 is a dual common point ground cord with a 1 megohm resistor,15′ cord and a male 3/8″ (10mm) snap
  • Equipped with two standard banana jacks – Grounds up to two operators at the same time
  • Molded head has a 3/8″ male snap for worksurface attachment
  • Length: 15ft ground wire
  • Connection to Ground: A 1/8″ (#10) ring terminal attaches to the center screw of an outlet or other ground points
  • Meets or exceeds requirements of ANSI/ESD S20.20 and ANSI/ESD S-6.1.