Constant Monitors

Continuously Monitors One Wrist Strap and One Work Surfaces Built-in Relay Terminal to Connect to External Locks, Signals, Lights etc. Alarms When A Person is Sensed and Not Grounded By...

Ensure ESD Protection: Ensure your ESD Workstation is Static-Safe by Continuously Checking Two Single Wire Wrist Straps & One Worksurface Compatibility: Compatible with Most Standard Single Wire Wrist Straps Alarms: Audible and...

Ensure ESD Protection: Ensure your ESD Workstation is Static-Safe by Continuously Checking One Single Wire Wrist Strap & One Worksurface Compatibility: Compatible with Most Standard Single Wire Wrist Straps Alarms: Audible and...

Ensure ESD Protection: Ensure your ESD Workstation is Static-Safe by Continuously Checking One Single Wire Wrist Strap Compatibility: Compatible with Most Standard Single Wire Wrist Straps Alarms: Audible and Visual Alarms Indicate...

Eliminate the need to test ESD wrist straps prior to the shift and stop failures of ground equipment during the work day Continuously checks the functioning  of one single wire...

The CM410 Monitors Your Wrist Strap and Worksurface So That You Are Properly Grounded and Safe from ESD Damage. Elimates Time Consuming Testing of ESD Wrist Straps and Worksurface with...

Monitors Two Operators and One Workstation Mat Easy To Use: Simply Plug In Wrist Strap Audible and Visual Alarms Factory Calibrated with Certificate – Does Not Require Recalibration...

Monitors one dual wire wrist strap and one ESD work surface for ESD Compliance Uses accurate resistance based monitoring technology Easy to use and economical Uses an ultra-low voltage signal...

CAPABILITIES: Monitors 1 dual wire wrist strap and will alarm if resistance exceeds 35 meg. This scaled back monitor lowers the cost of dual wire monitoring. SUPERIOR TECHNOLOGY: Uses accurate dual conductor resistance...

CAPABILITIES: One device that can monitor your entire workstation: Two wrist straps; Two work surfaces and Two auxiliary grounds SUPERIOR TECHNOLOGY: Uses accurate dual conductor resistance monitoring technology to ensure ESD protection...

Monitors two dual wire wrist straps and two worksurfaces Uses resistance based monitoring technology Ultra-low voltage signal Conductive metal case Audible and visual alarm indicators Network-ready for use in the...

Monitors two dual wire wrist straps, two worksurfaces, two auxiliary grounds, and  operator voltage Uses resistance based monitoring technology Ultra-low voltage signal Conductive metal case Alarms are selectable with software Network-ready...

Periodic Verification Tool for the Resistance Ranger Constant Monitors Quickly Verify That Constant Monitors are Calibrated and Operating according to Specifications Resistor Box Containing 5% Fixed Precision Resistors...

Periodic Verification Tool For CM400 and CM410 Verfies that the constant monitor is in proper working order. Factory calibrated.  No recalibration required. Comes with Certificate....

Periodic Verification Tool For CM420 Constant Monitor Simulates Passing / Failing Wrist Straps and Worksurfaces The Tool Verifies That The Constant Monitors Are Working Properly...

Use the CM-RELAY to add an external signal to your Resistance Ranger Series Constant Monitor. The CM-RELAY allows a signal such as a Light Tower or Alarm to be added...

Use the CM-RELAY-IOT power strip with Constant Monitors to safely control AC power to your ESD protected workstation Relay Controlled Power Strip (2 Normally Off, 1 Normally On, 1 Always...

Replacement for your plastic Resistance Ranger Constant Monitor wrist strap remote jack. Compatible with the Resistance Ranger Series: CM1600 CM1601 CM1602 CM2800 CM2815...

Metal wrist strap remote jack for Resistance Ranger Series Constant Monitor More durable than plastic version...

A replacement ground cord for the CM400 Series Constant Monitors. Allows the CM400 Series to monitor the ground connection of the worksurface mat. Compatible with model number CM400, CM410, CM420 constant...

A replacement power cord for the CM300 & CM400 Series Constant Monitors. Powers the CM300& CM400 Series constant monitors Compatible with model number CM400, CM410, CM420 constant monitors from Transforming Technologies....

A replacement wrist strap remote for the CM420 Series Constant Monitors. Compatible with model number  CM420 constant monitors from Transforming Technologies....

Provides a jack to “park” your wrist strap when you need to leave the workstation Compatible with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from Transforming Technologies....

CYCLOPS™ operator presence sensors for the Ranger Series Constant Monitor Produces an alarm if a person is within the protected work area and is not grounded by a wrist strap...

CYCLOPS operator presence sensors for the Ranger Series Constant Monitor Produces an alarm if a person is within the protected work area and is not grounded by a wrist strap...

Dual Wire to Single Wire Coil Cord Adapter:   Convert a 3.5mm Stereo Plug to a Standard Banana Plug Use this Adapter with Dual Wire Resistance Wrist Strap Sets to Connect...