Electronics

ESD products are critically important in the electronics industry because they protect sensitive electronic components from damage caused by static electricity. Many electronic components are highly sensitive to static discharge. ESD damage may be catastrophic (immediate failure) or latent (fails later in the field). Latent damage caused by ESD can lead to product failures after shipment, which is extremely costly in terms of reputation and warranty claims. Replacing damaged parts, reworking boards, or scrapping entire assemblies can be expensive. Manufacturing lines without proper ESD control risk high yield loss. There are many standards to maintain compliance with industry standards. Our products fall in line with the standards set by ANSI/ESD S20.20. The products are qualified and verified within these parameters set to ensure customers will pass any ESD audit.

Image

The electronics industry uses a range of anti-static products to manage and control static electricity. Some of the most common anti-static products include:

Anti-static Wrist Straps

These straps are worn by personnel to safely discharge any static charge they may have accumulated. The wrist straps are grounded, ensuring that any potential static charge is safely dissipated before handling sensitive materials or instruments.

Image(opens in a new tab)
WB0018 Single Wire Wrist Band 10mm snaps - Blue
Image(opens in a new tab)
WB5100 Series Dual Conductor Metal Wrist Band and 10ft Coil Cord Set
Image(opens in a new tab)
WB7200R Series Dual Conductor Fabric Wrist Band and 20ft Right Angle Coil Cord Set
Image(opens in a new tab)
WB1744 Single Wire Wrist Band & Coil Cord Set - 12ft, 7mm snaps

Anti-Static Mats

Anti-static mats are placed on workbenches and surfaces where sensitive equipment or experiments are conducted. These mats help to dissipate static charges and protect equipment, particularly electronic devices, from electrostatic discharge. They also prevent dust or particulate matter from accumulating on samples.

Image(opens in a new tab)

MT2500 Series: Two-Layer ESD Rubber Pre-Cut Table Mats - 0.060" Thick

Image(opens in a new tab)

ESD Mat & Table Top Cleaner - Spray Bottle - Quart

Image(opens in a new tab)

MT2500 - Two-Layer ESD Rubber Table Mat - 0.060" Thick Full Rolls

Image(opens in a new tab)

ESD Mat & Table Top Cleaner - Gallon

Ionizers

These devices are used to neutralize static charges in the air or on surfaces by emitting positive and negative ions. Ionizers are especially important in cleanrooms or environments where controlling the buildup of static electricity is critical to the success of experiments and research.

Image(opens in a new tab)

BFNG10 Ionizing Blow Off Gun

Image(opens in a new tab)

Ptec IN4000 Airflex Flexible Neck ESD Ionizing Nozzle

Image(opens in a new tab)

SCION IN1200 Series ESD Ion Bars

Image(opens in a new tab)

Ptec IN5130 Three Fan Overhead ESD Ionizing Blower

Anti-static Gloves and Clothing

Personnel often wear anti-static gloves, smocks, and coats to prevent static buildup on their bodies, especially when handling sensitive materials, chemicals, or laboratory equipment. These garments are designed to minimize the risk of ESD by ensuring that static charges are safely discharged.

Image(opens in a new tab)

GL6500N - ESD Level 6 Cut Resistant Gloves - Nitrile Palm Coated

Image(opens in a new tab)

Blue 8812 Series ESD Jackets: V-Neck, ESD Knit Cuff

Image(opens in a new tab)

Blue 8812 Series ESD Jackets: V-Neck, Three Snap Adjustment Sleeve

Image(opens in a new tab)

White 8812 Series ESD Jackets: V-Neck, Three Snap Adjustment Sleeve

Heel Grounders

Where static control is essential, personnel may wear ESD heel grounders or shoe covers to prevent the buildup of static charge on the floor. These products help ground any static charge that may accumulate on the body during movement around the lab.

Image(opens in a new tab)

HG1341 - Standard Cup Style Blue Hook and Loop ESD Heel Grounder - 1Meg

Image(opens in a new tab)

HG6030 - Full Coverage ESD Sole Grounders - Large - 1Meg

Image(opens in a new tab)

SC50BS Series - ESD Washable Cleanroom Shoe Covers

Image(opens in a new tab)

HG6022 - Full Coverage ESD Sole Grounders - Medium - 2 Meg

ESD Wipes

These wipes are used for cleaning surfaces in controlled environments like laboratories, ensuring that dust or particles, which can attract static charges, are removed. They are designed to be low-lint and anti-static, making them suitable for use with delicate instruments and samples.

Image(opens in a new tab)

BEMCOT M-3 - Static Dissipative Cleanroom Wipers

Image(opens in a new tab)

ESD Mat & Table Top Cleaner - Gallon

Image(opens in a new tab)

WP8200 - Cleanroom Safe ESD Inspection Wiper - 9"x9"

Image(opens in a new tab)

ESD Mat & Table Top Cleaner - Spray Bottle - Quart

ESD Brushes and Bottles

Used to clean sensitive equipment and instruments without generating static. These brushes have conductive bristles that help prevent static buildup during cleaning, making them ideal for use on delicate electronics and laboratory instruments.

Image(opens in a new tab)

ESD Flux Dispensers

Image(opens in a new tab)

ESD Conductive Brushes

Image(opens in a new tab)

ESD Solvent Bottles

Have more questions? Reach out to us and we will be happy to assist!

Contact Us