The AccessPRO system with the PGT120 and the FastPass turnstile tests personnel grounding devices, logs test data and user IDs and controls access to an ESD protected area.

The PGT120 personnel grounding tester with the FastPass turnstile verifies the functionality of an operator’s wrist strap, ESD footwear or ESD jacket and only allows access through the turnstile with a PASS test.

The system has the following features:

• ESD Product Testing
• Electronics Data Acquisition
• User Identification
• Reporting and Software
• FastPass Turnstile

The PGT120 tests the operators path-to-ground and indicates that the wrist strap and footwear are functioning properly with green lights and the turnstile allows passage through. Red lights, an audible alarm indicate that the grounding products are failing and should be replaced. A failed test denies access to the ESD protected area.

The measuring voltage is preset to 100volts for superior accuracy but can be adjusted to either 30volts or 50volts. The testing unit operates with 3 independent measuring circuits so the wrist strap, left foot and right foot can be tested at the same time or turned off completely. The footwear upper limit can be adjusted to 20M, 35M, 70M or 100M. The shoes can even be measured in a hands-free mode which means that the staff members are tested automatically when standing on the plate.

The PGT120 is an easy to use and complete test station for ESD shoes and wrist straps.

The personnel grounding tester is able to perform a quick and accurate control measurement of the ESD protection. The test results are indicated both with audible and visual signals. The PGT120 measures the left and right shoe separately.

Verification and Calibration:
The PGT AccessPRO comes factory calibrated and with a calibration certificate. Calibration can be tested and verified with the PGT120.CU resistor box.