TD1023 One Roll ESD Tape Dispenser
TD1023 One Roll ESD Tape Dispenser
TD1023 One Roll ESD Tape Dispenser is a High Quality Steel Desktop Dispenser for use with ESD Tapes and other tapes Weighted-Rubber Lined Based for Stability and One Hand use...
More info
TD2023 Two Roll ESD Tape Dispenser
TD2023 Two Roll ESD Tape Dispenser
TD2023 Two Roll ESD Tape Dispenser is a High Quality Steel Desktop Dispenser for use with ESD Tapes and other tapes Weighted-Rubber Lined Based for Stability and One Hand use...
More info
TD3023 Three Roll ESD Tape Dispenser
TD3023 Three Roll ESD Tape Dispenser
ESD Tape Dispenser is a High Quality Steel Desktop Dispenser for use with ESD Tapes and other tapes Weighted-Rubber Lined Based for Stability and One Hand use Serrated Blade with...
More info
TX40BE Series – ESD Soft Sole Boot with Ground Ribbons (Groundable)
Image
TX4000 ESD Grid Fabric—99% Polyester / 1% Carbon Three layer ESD rubber soft sole (non-marking rubber inside and outside) Hypalon side wall Combination 1” elastic and webbing at top of...
More info
TX40BH Series – ESD Hard Sole Boot with Ground Ribbons (Groundable)
Image
TX4000 ESD Grid Fabric—99% Polyester / 1% Carbon PSTAT ESD Hard Sole with twill reinforcement Combination 1” elastic and webbing at top of closure with snap adjustment Replaceable 18” internal...
More info
TX40CR Series – ESD Cleanroom Coverall
Image
TX4000 ESD Grid Fabric—99% Polyester / 1% Carbon Raglan sleeves with ESD knit cuffs for body contact Military collar Zipper closure with snaps for easy gowning Seams sewn with conductive...
More info
TX40FR Series – ESD Cleanroom Frock
ESD Cleanroom Frock
The TX4000 Series ESD Cleanroom Frock is Designed for Controlled Environments Such as Cleanroom That Are Concerned with Static and ESD Damage TX4000 ESD Grid Fabric—99% Polyester / 1% Carbon...
More info
TX40HF Series – ESD Cleanroom Hood with Ground Snaps
Image
TX4000 ESD Grid Fabric—99% Polyester / 1% Carbon Open face with snap-under-the-chin closures Two vertical snaps at each side of temples Vertical and horizontal snaps in back and shoulders Rolled...
More info
WBAS28 ESD Waste Basket – 28 Quart (7 gallon )
WBAS28 ESD Waste Basket
Use ESD trash cans to safety dispose of waste materials in static sensitive areas Size: 7 gallon (28 quart) capacity Permanently conductive – will never lose ESD properties ESD symbol in yellow...
More info
WBAS90 ESD Trash Can – 22 Gallon
wbas90-22-gallon-esd-trash-can
22 gallon capacity Permanently conductive – will never lose ESD properties ESD symbol in yellow printed on body for easy identification Typical point-to-point resistance: 10^4 – 10^5 ohm Requires LTL Shipping...
More info
WBAS180 ESD Trash Can – 44 Gallon
wbas180 44 gallon esd trash can
Conductive ESD trash cans remove the static threat of plastic receptacles that can damage sensitive electronic devices. 44 gallon capacity Permanently conductive – will never lose ESD properties ESD symbol in yellow...
More info
WBAS28MET Cleanroom ESD Waste Basket: 28 Quart (7 gallon )
Image
Ideal for Cleanrooms and other controlled environments 7-gallon capacity Made with permanently conductive stainless steel Typical point-to-point resistance: 10^2 – 10^3 ohm...
More info
WBASDM – Conductive Metal ESD Trash Can Dolly
esd trash can dolly
Conductive ESD dolly used with the WBAS180 ESD trash can to create a conductive path to the floor that is mobile. Two of the Five 3” x ” Casters (CDP)3”...
More info
WBASLB – 7 Gallon Black Conductive ESD Trash Can Liner, 28 – 40 Quart (7 – 10 Gallon )
Image
Conductive Black Trash Liner 28 – 40 Quart (7 – 10 Gallon ) Safely dispose of waste materials that pose a static damage threat. Sold in packs of 100 liners...
More info
WBASLP – ESD Trash Can Liner, Dissipative, Pink, 28 – 40 Quart (7 – 10 Gallon )
44 Gallon Pink Dissipative ESD Trash Can Liners
Dissipative trash liners for ESD protection 7-10 gallon (28-40 Quart) capacity Average surface resistivity is less than or equal to 10^11 ohms per square Static decay rate is less than...
More info
WBAS22LP – ESD Trash Can Liner, Dissipative, Pink, 22 Gallon
44 Gallon Pink Dissipative ESD Trash Can Liners
USE: Safely dispose of waste materials that pose a static damage threat with dissipative trash liners CAPACITY: 22 gallon / 90 liter ESD PROPERTIES: Average surface resistivity is less than...
More info
WBAS22LB – ESD Trash Can Liner, Conductive, Black , 22 Gallon
Image
Conductive black trash liner 22 gallon capacity Safely dispose of waste materials that pose a static damage threat. Sold in packs of 100 liners...
More info
WBAS44LP – ESD Trash Can Liner, Dissipative, Pink, 44 Gallon
44 Gallon Pink Dissipative ESD Trash Can Liners
Dissipative trash liners for ESD protection 44 gallon capacity Average surface resistivity is less than or equal to 10^11 ohms per square Static decay rate is less than two seconds....
More info
WBAS44LB – ESD Trash Can Liner, Conductive, Black , 44 Gallon
Image
Conductive black trash liner 44 gallon capacity 4 Mil Thickness Safely dispose of waste materials that pose a static damage threat. Sold in packs of 50 liners...
More info
ESD Jackets: Medium Weight 9010 Fabric, ESD Knit Cuff
Image
ALL APPLICATIONS: A medium-weight ESD jacket that is perfect for all working environments DURABILITY: The jacket is made with extremely durable materials and passes all tests even after 100 washing cycles...
More info
TX4000 ESD Cleanroom Garment System
Image
The TX4000 ESD-Safe Integrated Cleanroom Wear is Designed For Use in Cleanrooms and Controlled Environments When Contamination Control and ESD Protection Is Paramount ESD Groundable Garment System: Electrical Continuity From...
More info
ESD Jackets: Medium Weight 9010 Fabric, Lapel Collar, Three Snap Adjustment Sleeve
Image
ALL APPLICATIONS: A medium-weight ESD jacket that is perfect for all working environments DURABILITY: The jacket is made with extremely durable materials and passes all tests even after 100 washing cycles SLEEVE...
More info
ESD Jackets: Medium Weight 9010 Fabric, V-Neck, Snap Cuff
9010-all-colors-esd-jacket-v-neck-snap-cuff-model-blue
Medium-weight ESD jacket – Perfect for all working environments V-Neck Collar and Snap Front Enclosure Three Snap Adjustment Sleeve Extremely durable – Still  groundable after 100 washing cycles Level 3...
More info
ESD Jackets: Medium Weight 9010 Fabric, V-Neck, ESD Knit Cuff
9010 Series ESD jacket V-Neck Knit Cuffs
Medium-weight ESD jacket – Perfect for all working environments V-Neck Collar and Snap Front Enclosure ESD Cuff allows for “Hands-Free” grounding Extremely durable – Still  groundable after 100 washing cycles...
More info
High Visibility Yellow ESD Jackets: Lapel Collar, Three Snap Adjustment Sleeve – Yellow
Hi-Vis Yellow Green ESD Jacket
HIGH VIS SAFETY COLORS – High-visibility yellow/green colored ESD jacket allows the wearer to stand out to enhance worker safety ALL-PURPOSE – made with a medium-weight fabric that is perfect...
More info
High Visibility Orange ESD Jackets: Lapel Collar, Three Snap Adjustment Sleeve – Orange
Hi-Vis ESD Jacket - Orange
High-visibility orange colored ESD jacket Medium-weight fabric- Perfect for all working environments Extremely durable – Certified “a groundable garment system” after 100 washing cycles Level 3 ESD Jackets – Complies with...
More info
ESD Jackets: Lapel Collar, Three Snap Adjustment Sleeve – Grey Camouflage
Image
Grey Camouflage ESD jacket protects against static damage by shielding sensitive electronics from static generated from your body Three snap sleeve to adjust fit 9010 Series Medium-weight fabric- Perfect for...
More info
ESD Jackets: Lightweight 8812 Fabric, Lapel Collar, Snap Cuff
Image
8812 Fabric: Made with lightweight 88% Polyester and 12% carbon for maximum breathability 3/4ths length jacket cover more clothing – about mid-thigh Snap Cuff: The sleeve terminates with three snaps...
More info
ESD Jackets: Lightweight 8812 Fabric, Lapel Collar, Knit Cuff
Lightweight ESD Jacket with Lapel Collar and Knit Cuffs
Keeps You Cool: ESD jacket with light weight fabric keeps you cool and ESD protected while you work 8812 Fabric: Made with lightweight 88% Polyester and 12% carbon for maximum breathability...
More info
ESD Jackets: Lightweight 8812 Fabric, V-Neck Collar, ESD Knit Cuff
Light Weight ESD Jacket Vneck Knit Cuff
EXTREMELY COMFORTABLE: Made with lightweight polyester fabric for maximum breathability.  Our 8812 series fabric is 88% polyester and 12% carbon for the perfect mix of comfort and ESD protection ESD...
More info
ESD Jackets: Lightweight 8812 Fabric, V-Neck Collar, Snap Cuff
8812 Light Weight ESD V-Neck Collar with Snap Cuff
Keeps You Cool: ESD jacket with light weight fabric and V-Neck Collar keep you cool and ESD protected while you work 8812 Fabric: Made with lightweight 88% Polyester and 12% carbon...
More info
Short Sleeve ESD Jacket: V-Neck, Lightweight 8812 Fabric,
8812 V-Neck Short Sleeve Jacket
STATIC-SAFE: ESD Garments as part of a complete ESD program and shield static sensitive items from the dangers of ESD. STYLE: The best jackets for warm climates! Made with lightweight...
More info
ESD Jackets: Heavy Weight 5049 Fabric, Lapel Collar, ESD Knit Cuff
Heavyweight Cotton ESD Jacket
ALL APPLICATIONS: Our heavy-weight ESD jacket that is perfect for all working environments such as Electronics Manufacturing & Repair, Laboratory, Automotive, Aerospace and General Industrial Applications. ESD Properties: Our superior...
More info
ESD Jackets: Heavy Weight 5049 Fabric, Lapel Collar, Snap Cuff
Heavier Cotton ESD Jacket
ALL APPLICATIONS: Our heavy-weight ESD jacket that is perfect for all working environments such as Electronics Manufacturing & Repair, Laboratory, Automotive, Aerospace and General Industrial Applications. ESD Properties: Our superior...
More info
ESD Lab Coat: Lapel Collar, Heavyweight 5049 Fabric
Full Length ESD Lab Coat For Static Control
HEAVYWEIGHT ESD FABRIC: made with more cotton than traditional ESD jackets. A blend of 32% Cotton, 66% Polyester and 2% Carbon. MORE COMFORTABLE:  ESD Lab Coat more comfortable to wear and...
More info
ESD Cleanroom Frock – White, Light Blue, and Navy Blue – ESD Knit Cuffs
Image
ESD Safe Class 1000 Cleanroom Frock Extremely Durable Cleanroom Fabric Contains a Conductive Grid That Reduces Static Generation Full-length lab coat – Covers More Clothing ESD Knit Cuffs Navy Blue,...
More info
BFN801 Benchtop Ionizing Blower
Image
Excellent static elimination performance Coverage Range: 1′ x 5′ area Uses AC technology to produce a balanced output of air ions:+10 volt Built-in emitter point cleaner Variable fan speed control Easy...
More info
Ptec IN5500 Self-Cleaning Bench Top Ionizer
Image
Remove Static Charges Quickly and Efficiently Self-Cleaning System Makes Service and Maintenance a Breeze Perfect for Single Station Table Top, Bench or Desk Use Small Footprint – Does Not Take Up...
More info
Ptec IN5110 Benchtop ESD Ionizing Blower
Image
Remove Static Charges Quickly and Efficiently Perfect for Single Station Table Top, Bench or Desk Use Small Footprint – Does Not Take Up Space Variable Fan Speed Standard Products Works...
More info
PTEC IN5120 “In Tool” ESD Ionizing Blower
in5120-in-tool-small-ionizing-blower
Remove Static Charges Quickly and Efficiently With Only Airflow Ionizers are Best Used When Traditional Methods of Draining Static Charges with a Grounding Wire Cannot Be Used. Perfect for “In Tool”...
More info
Ptec IN5130 Three Fan Overhead ESD Ionizing Blower
Image
Three fan overhead ionizing blower Exceptionally fast static decay capability: 1000V—100V, < 6 seconds @ 24” Excellent balance stability: +/- 30volts Does not take up valuable workspace. Ptec™ ionizers save...
More info
BFN802 Two Fan Overhead Ionizer with LED Task Light
Image
Two fan overhead ionizer that quickly removes static charge Coverage area: 2’x3′ Includes energy efficient LED lights Uses AC technology to produce a balanced output of air ions:+10 volt Built-in...
More info
BFN803 Three Fan Overhead Ionizer with LED Task Light
Image
Three fan overhead ionizer that quickly removes static charge Coverage area: 2’x4′ Includes energy efficient LED lights Uses AC technology to produce a balanced output of air ions:+10 volt Built-in emitter point...
More info
CrossFLOW IN3000 Wide Coverage Benchtop Ionizing Blower with Heater
CrossFLOW IN3000-wide-coverage-bench-top-ionzing-esd-blower
Rapid static elimination performance Wide Coverage Range: 3′ x 6′ area Uses AC technology to produce a inherently balanced output: ±10V Integrated heater Integrated emitter point cleaner Ionization status light...
More info
BFN8412 Extended Coverage Bench Top Ionizer
Image
Excellent static elimination performance Extended Coverage Range: 3′ x 6′ area Uses AC technology to produce a balanced output of positive and negative air ions. Integrated emitter cleaner for ease...
More info
BFNG10 Ionizing Blow Off Gun
BFNG10 Ionizing Blow Off Gun
EXCELLENT STATIC ELIMINATION: Fast static decay times (1000-100v in 2 seconds at 12″) PRECISION: The handheld guns provides point-and-shoot precision ionization where ever you need it. DESIGN: A single integrated...
More info
Ptec IN6200 ESD Ionizing Gun
Image
EXCELLENT STATIC ELIMINATION: Fast static decay times (1000-100v in 2 seconds at 12″) PRECISION:  It provides superior control and targeted particulate removal for a wide variety of industrial applications. DURABLE DESIGN: The...
More info
Ptec IN6430 ESD Ionizing Gun
Image
EXCELLENT STATIC ELIMINATION: Fast static decay times (1000-100v in 2 seconds at 12″) PRECISION:  It provides superior control and targeted particulate clean up for a wide variety of industrial applications. DESIGN: A...
More info
Ptec IN4000 Airflex Flexible Neck ESD Ionizing Nozzle
IN4000 Airflex Ionizing Nozzle
Flexible neck allows you to optimally position airflow. Multiple nozzle options to customize airflow for your specific application. Hands-Free operation with foot pedal operation Optional .01 micron filter for clean air Ionization...
More info
Ptec IN4000PE AirFLEX Flexible Neck ESD Ionizing Nozzle with Photoelectric Eye
Image
Flexible neck allows you to optimally position airflow. Multiple nozzle options to customize airflow for your specific application. Hands-Free operation – With Photo Electric Eye Optional .01 micron filter for clean...
More info
Ptec IN4200 Airflex Flexible Neck ESD Ionizing Nozzle – Mountable
IN4200
Flexible neck allows you to optimally position airflow. Multiple nozzle options to customize airflow for your specific application. Hands-Free operation with foot pedal operation Optional .01 micron filter for clean air Ionization...
More info
Ptec IN4200PE AirFLEX Flexible Neck Ionizing Nozzle with Photoelectric Eye – Mountable
Image
Flexible neck allows you to optimally position airflow. Hands-Free operation – With Photo Electric Eye Multiple nozzle options to customize airflow for your specific application. Mountable Optional .01 micron filter for...
More info
Ptec IN3425 AC Ionizing Nozzle
Image
Physically small and light, can be mounted in hard to reach areas. Suitable for pinpoint, high-pressure air purging static elimination Multiple nozzle options to customize airflow for your specific application....
More info
Ptec IN3425PE ESD Ionizing Nozzle with Photoelectric Eye
Image
Physically small and light, can be mounted in hard to reach areas. Suitable for pinpoint, high-pressure air purging static elimination Multiple nozzle options to customize airflow for your specific application....
More info
BFN Ionizer Spare Parts
BFN Spare Parts
The following spare parts are available for the BFN series ionizers: BFN801, BFN802, BFN803, BFN8412.  If the part required is not listed, please contact Transforming Technologies for availability....
More info
Ionizer Output Nozzle Tips
Image
Change airflow of IN3425, IN3425PE, IN4000, IN4000PE and IN6430 ionizers with output nozzles tips 15° Angle Wide Angle Luer Lock Long Range Bendable Manifold...
More info
FL0020 – Filter for Ionizing Nozzles
Image
0.01μm Hollow Fiber Micro Filter Excellent Particle Removal Efficiency Compact and Light Weight Quick and Convenient Filter Change Use with IN3425, IN3425PE, IN4000, IN4000PE...
More info
FL0030 – Filter for the IN6430 Ionizing Gun
FL0030
0.01μm Hollow Fiber Micro Filter for the IN6430 ionizing gun Excellent Particle Removal Efficiency Compact and Light Weight Quick and Convenient Filter Change Precision Cleaned Product...
More info
SCION IN1200 Series ESD Ion Bars
Image
Provides uniform static elimination at high speeds. AC Square Wave Technology  – AC stability with DC control Quickly and efficiently controls static in mini-environments, laminar flow hoods and wide-area workstation...
More info
StaticAIRE Still Air Ionizer – Model IN1000
Image
  Quickly Eliminate Static Charges in Localized Areas without Airflow Effective ionization range: 12″ Ideal Where Space Is Limited and Installed Inside Equipment Easy Adjustment and Calibration...
More info
Warmbier METRISO® 3000 ESD Audit Kit
Image
Kit that includes the relevant test instruments and equipment needed to perform ESD audits Measure electrostatic fields Measure surface resistance Analyze ionizers performance Evaluate packaging materials Evaluate garments Measure flooring,...
More info
Warmbier METRISO® B530 ESD Audit Kit
Image
Kit that includes the relevant test instruments and equipment needed to perform ESD audits Measure electrostatic fields Measure surface resistance Analyze ionizers performance Evaluate packaging materials Evaluate garments Measure flooring,...
More info
Warmbier 7100.EFM51.VK Electrostatic Field Meter Verification Kit
Image
ESD Verification Kit:  Perform Three Important Tests in Static Control with One Kit – Measure Static Fields, Perform the Walking Test and Verify the Performance of Ionizers.  Features Include: Field...
More info
Warmbier CPM35 Ionizer Verification Meter
7100.CPM35 Charge Plate
Ionizer verification meter for measuring the decay time and the offset voltage of air ionizers. The Warmbier CPM35 can be used to evaluate ESD ionizers efficiency in electronic manufacturing and in...
More info
Warmbier 7100.EFM51.Plus Electrostatic Field Meter
EFM51 Plus - Field Meter with Case
Measures static voltages within ±20kV (20,000V) Two LED guide ring lights help position the field meter Storage bag including ground cable and clip Pocket-size Conductive Carrying Case Ground Cord German...
More info
Warmbier 7100.EFM51 Electrostatic Field Meter
EFM51 Static Field Meter
Measures static voltages within ±20kV (20,000V) Two LED guide ring lights help position the field meter Storage bag including ground cable and clip Pocket-size Verify Ionizer with EFM51.CPS “Charge Plate Set”...
More info
EFM250 Static Field Meter
Image
Perform static surveys and evaluate charge accumulation in electronic manufacturing and in industrial operations such as converting, printing, packaging, and plastics processing LED Guide: Pulsing-beam rangefinder for always obtaining the...
More info
VT1000 Electrostatic Volt Meter
The VT1000 handheld electrostatic volt meter designed to measure the static voltage on the surface of isolated conductors and much more.
Hand-Held, Easy-To-Use Meter To Measure Voltage On Surfaces Such as Isolated Conductors & Perform The Walking Test on ESD Floors Applications Include Engineering, Maintenances, Quality Control, Material Inspection, and Manufacturing...
More info
Warmbier ESD Starter Kit with Field Meter and SRM Meter
ESD Starter Kit
ESD Testing: A kit that takes the basic measurements needed for an ESD program Resistance: Quickly and easily test surface resistivity with the SRM200 surface resistance meter Field Locator: Use...
More info
Warmbier 7100.EFM51.CPS.SET Charge Plate System without EFM® 51 (for retrofitting)
7100.efm51.cps Charged plate set without EFM® 51 for retrofitting
Charged plate set  for retrofitting the EFM® 51 (not included) Includes a High Voltage Generator (+/- 1200 volt), Base Charging Plate Ground Connection Carrying Case Batteries Calibration Certificate...
More info
Warmbier 7100.EFM51.CPS Charge Plate System and Field Meter
Image
Measures static voltages within ±20kV (20,000V) and test ionizer decay and balance Includes a handheld high voltage generator. Charge plate, and base Two LED guide ring lights help position the...
More info
Warmbier Walking Test Kit WT5000 Electrometer
Image
Perform the ESD Walking Tests for Floors – Prove that Your ESD Floor is Grounding Your Personel Tests ESD Floor Compliance per ANSI/ESD STM 97.2. and IEC 61340-4-5. Measures Voltage...
More info
Warmbier 7100.EFM51WT Field Meter Walking Test Kit
Image
Tests ESD Floor Compliance per ANSI/ESD STM 97.2. and IEC 61340-4-5. Measures Voltage Generated on the Body While Walking Handheld, Portable Meter with Conductive Carrying Case  Also is a Fully...
More info
METRISO® 3000 Surface Resistance Test Kit
Image
The METRISO® 3000 Surface Resistance Test Kit capable of measuring a wide resistance range and complete the tests required for an ESD protection plan. Perform resistance tests such as resistance...
More info
Warmbier METRISO®B530 Surface Resistance Test Kit
Image
Perform resistance tests to evaluate items for ESD compliance Test range: Low ohmic range: 1 to 10 kOhm – 199 GOhm Comes with 5lb probe set with innovative extension handle Comes in...
More info
Warmbier 7100.SRM200.VK Pocket Digital Surface Resistance Verification Kit
Image
Perform resistance measurements to determine if a surface is dissipative, conductive, or insulative Test range: 10^3-10^12 Stores test data that can be accessed via USB  Measures temperature and humidity Test...
More info
Warmbier 7100.SRM200.K Pocket Digital Surface Resistance Meter
SRM200 Surface Resistance Meter
ESD TESTING: Perform resistance measurements to determine if a surface is dissipative, conductive, or insulative RANGE: Test range: 10^3-10^12 DATA LOGGING: Stores test data (up to 9801 measurement values) in...
More info
Warmbier 7100.SRM110.A Pocket Digital Surface Resistance Test Kit
Image
Quickly and accurately take resistance measurements with the Warmbier SRM110. The LED readout will report the resistance in powers of 10 (example 10^10) Indicates if the surface is Insulative, Conductive...
More info
SRM500K Digital Surface Resistance Test Kit
Image
Complete testing kit for resistance measurements such as resistance-to-ground, resistance point-to-point, and volume resistance 10v and 100v range voltage selection Automatic zeroing and power shut off Tests temperature and humidity Two 5...
More info
SRM310 Pocket Digital Surface Resistance Test Kit
Image
Pocket-Sized Digital Surface Resistance Test Kit Test range: 10^3-10^12 Test voltage: 10V/100V(automatic ranging) Accuracy + 5% Built-in resistivity probes Carrying bag...
More info
SRM330 Lightweight Travel Surface Resistance Meter Kit
SRM330 Surface Resistance Meter Kit
The ultimate Lightweight Travel Surface Resistance Meter Kit for testing materials for electrical resistivity/resistance on the move – lightweight and portable! Easy-to-read color coded readout screen Two lightweight “Press &...
More info
Model CPM74 Warmbier Charge Plate Monitor
Image
The Warmbier CPM74 Charge Plate Monitor is an simple-to-use device to measure air ionizers performance. ESD Compliance: Quickly and easily test ionizer decay times and offset voltage (balance) according to...
More info
Warmbier 7220.880.SET Concentric Ring Probe Model 880, with Carrying Case
Image
A concentric ring probe used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements. Concentric ring with conductive rubber (R < 5 ohm)...
More info
Warmbier 7220.890 Two Sided Probe
Image
Two-sided probe combines a concentric ring and disk probe Made with conductive plastic containing silver particles Take resistance-to-ground, point-to-point and volume resistance measurements Include stainless steel plate, insulative plate, and...
More info
SR0065 5lb Surface Resistance Probes
Image
5lb disk electrode probes for use with Surface Resistance Meters Designed to test point-to-point (RTT) and point-to-ground resistance (RTG) in accordance with ESD Association Standards. Make measurements on floors, mats,...
More info
Warmbier 7220.410 Two Point Probe
Image
Measures point-to-point surface resistance of small areas Spring loaded contact pins. Connects to meters with banana plugs Works with the SRM110 and SRM200 surface resistance meters...
More info
Warmbier 7200.CL.49 Clamp Probes for Testing ESD Garments
olfgang-warmbier-7200.CL-49 ESD Garment-testing-clamp
7200.CL.49 clamps probes are designed to evaluate ESD garments accounting ANSI ESD20.20 Wide steel clamps ensures excellent contact with fabric Made from rugged stainless steel Banana plug socket for connection...
More info
Warmbier 7220.45 Hand Probes for Surface Resistance Meters
wolfgang-warmbier-hand-probe-7220
Hand probe are designed to evaluate ESD flooring according to ANSI ESD20.20 Made from rugged stainless steel Banana plug socket for connection to the testing meter Compatible with Surface Resistance Meters and...
More info
Warmbier 7100.TF-530 Digital Thermo-Hygrometer
wolfgang-warmbier-7100-tf530-thermo-hygrometer-wolfgang-warmbier
Take Precise Temperature and Humidity Measurements One Button Operation Mountable: Built-in 1/4” Tripod Thread Temperature: -30…+70°C (± 0,5°C at -10…+70°C) Humidity: 0 … 100% (± 3% at 20…80%)...
More info
Warmbier 7220.900 Backrest Probe
Image
Ensures Excellent Contact During Evaluations of ESD Chairs Rugged Metal Probe 4mm Banana Plug Socket Connection For Use With Resistance Meters...
More info
Warmbier 7100.VB Veribox
7100VB - Veribox From Warmbier
For the Periodic Verification of ESD Testers Contains Fixed Resistors: 1GΩ, 1MΩ, 10KΩ Passive Device – Uses No Power For Use With Most Available Resistance Meters...
More info
Warmbier 15 Glove Probe
Image
Glove probe is designed to evaluate ESD gloves according to ANSI ESD20.20 Ensures excellent contact during evaluations of ESD gloves The rugged metal probe is fitted with conductive contact points...
More info
Warmbier 7220.870.V.SET Extension Handle For Use with Probes
7220.870.v.set Probe Handle
Add Up To Three Feet to the Handle of ESD probes Eliminates the need to Bend During Testing Rugged Metal Design Three Piece Consuction Allows it to be Packed Away For...
More info
Warmbier 7100.2000.ML Test leads for Metriso Resistance Meters
7100.2000.ML Test Leads
Set of test leads for the Metriso series Surface Resistance Meters. Warmbier 7100.2000.ML Test Leads allows you to take resistance measurements with the Metriso series Surface Resistance Meters. Set includes...
More info
Warmbier 7100.2000.TR50 50ft Cable Reel
7100.200.TR50 50ft Cable Reel
Make testing floors easier with a 50ft cable reel Test Resistance Over a Larger Area The Reel Easily Rolls Up The Cable for Storage For Use With Most Available Resistance...
More info
SR0055 5lb Surface Resistance Probes
Image
SR0055 5lb Surface Resistance Probes...
More info
GL2500 – ESD Level 3 Cut Resistant Gloves – Uncoated
Anti-Static Level 3 Cut Resistant ESD Gloves
Multi-Purpose – Multi-Use Electronics Inspection and Handling Glove That Is Durable Enough For Most General Use Applications Cut Resistant  – Tested and Certified to ANSI Cut Level 3 ESD &...
More info
GL6500N – ESD Level 6 Cut Resistant Gloves – Nitrile Palm Coated
ESD Level 6 Cut Resistant Gloves
Multi-Purpose – Multi-Use Electronics Inspection and Handling Glove That Is Durable Enough For Most General Use Applications Cut Resistant  – Tested and Certified to ANSI Cut Level 6 ESD &...
More info
GL2500T – ESD Level 3 Cut Resistant Gloves – Fingertip Coated
GL2500-esd-cut-resistant-glove-finger-tip-coated
Multi-Purpose Electronics Inspection and Handling Glove Cut Resistant (ANSI Cut Level 3) Typical ESD Properties: <10^7 Ohms Fabric: 18 Gauge Yarn, UHMWPE Construction with Conductive Carbon. Fingertip Coat: Micro-Foamed Polyurethane...
More info
GL2500P – ESD Level 3 Cut Resistant Gloves – Palm Coated
GL2500-esd-cut-resistant-glove-palm-coated
Multi-Purpose Electronics Inspection and Handling Glove Cut Resistant (ANSI Cut Level 2) Typical ESD Properties: <10^7 Ohms Fabric: 18 Gauge Yarn, UHMWPE Construction with Conductive Carbon. Palm Coat: Micro-Foamed Polyurethane...
More info
GL4500P – ESD Nylon Inspection Gloves – Palm Coated
Image
ESD inspection gloves won’t leave finger prints or contamination Palm coated with micro-foam polyurethane Seamless nylon and conductive carbon nylon knit. Resistance: 10^6 – 10^8 per ANSI/ESD STM51.1 Reusable. Machine...
More info
GL4500T – ESD Nylon Inspection Gloves – Finger Tip Coated
Image
ESD inspection gloves won’t leave fingerprints or contamination Fingertip coated with micro-foam polyurethane Seamless nylon and conductive carbon nylon knit. Resistance: 10^6 – 10^8 per ANSI/ESD STM51.1. Reusable. Machine washable...
More info
GL4500 – ESD Nylon Inspection Gloves – Uncoated
Image
ESD inspection gloves won’t leave finger prints or contamination Uncoated for maximum breathability Seamless nylon and conductive carbon nylon knit. Resistance: 10^6 – 10^8 per ANSI/ESD STM51.1 Reusable. Machine washable...
More info
FG3900 Series – Nomex® Static Safe Cleanroom Hot Gloves – 16″
FG3900 clean room safe esd hot gloves
Have static protection and high heat protection in a clean room compatible glove Resists heat up to 572F (300C) Made with heat resistance Nomex® fabric with ESD carbon yarns Cleanroom...
More info
FG2600 Series – Nomex® Static Safe Cleanroom Hot Gloves – 11″
FG2600 clean room safe esd hot gloves
Have static protection and high heat protection in a clean room compatible glove Resists heat up to 572F (300C) Made with Nomex® Fabric that is inherently flame resistant, high-temperature fiber Compatible...
More info
FG6200 Series – Nomex® Static Safe Cleanroom Hot Sleeves
Image
Resists Heat Up to 572F Made with Nomex® Fabric Cleanroom Compatible Static Dissipative...
More info
GL9100 Series – Static Safe Hot Gloves – Polyester – 14″
ESD Safe Cleanroom Hot Gloves
Have static control and heat resistance in one glove Gloves resist up to 302°F(150°C) 100% inner tricot knit polyester fabric liner Clean room safe Cuff mounted Grounding snap...
More info
MT4500 Series: Two-Layer Rubber ESD Table Mats – 0.080″ Thick
MT4500 Series Two-Layer Rubber ESD Table Mats
ESD PROTECTION:  The MT4500 Two-Layer Rubber ESD Table Mats mats have a resistance of less than 1.0×10^9 ohms and provides reliable ESD protection for the life of the mat. TESTED...
More info
MT2500 Series: Two-Layer ESD Rubber Pre-Cut Table Mats – 0.060″ Thick
ESD Rubber Pre-Cut Table Mats
ESD RUBBER PRE-CUT TABLE MATS: Have a complete ESD-Safe workstation with our pre-cut table mat kits. Includes ESD mat, grounding snaps and common point ground cord. SIZES: Available in many...
More info
MT4500 Series: Two-Layer ESD Rubber Pre-Cut Table Mats
ESD Rubber Pre-Cut Table Mats
ESD RUBBER PRE-CUT TABLE MATS: Have a complete ESD-Safe workstation with our pre-cut table mat kits. Includes ESD mat, grounding snaps and common point ground cord. SIZES: Available in many...
More info
MT2500 – Two-Layer ESD Rubber Table Mat – 0.060″ Thick
Image
ESD PROTECTION:  The MT2500 Series mats have a resistance of less than 1.0×10^9 ohms and provides reliable ESD protection for the life of the mat. TESTED AND PROVEN:  The mats have been...
More info
MT4000 – Textured Two-Layer ESD Rubber Table Mat – 0.080″ Thick
MT4000 Textured Matting
ESD PROTECTION:  The MT4000 Series mats have a resistance of less than 1.0×10^9 ohms and provides reliable ESD protection for the life of the mat. NON-SLIP TEXTURE: The mats have a...
More info
VinylStat A – 3 Layer Premium ESD Table Mat Full Rolls and Pre-Cut Sizes
Image
VinylStat A is the ultimate in static dissipative flexible surfaces. A solid vinyl, homogeneous construction with a buried conductive layer gives VinylStat A its superior physical and unsurpassed electrical qualities....
More info
VinylStat B – 3 Layer ESD Table Mat w/ Foam Back
Image
Provides extra cushion for component safety and operator comfort. Three layers vinyl with excellent ESD protection Resistant to degradation by acids, reducing agents, detergent solutions, alcohols, aliphatic hydrocarbons, mineral oil,...
More info
VinylStat C Homogeneous Vinyl ESD Table Mat
Image
Creates an ESD safe work area by a providing a path-to-ground for electri-cal charges as well as protecting the work surface from damage. Available in Blue or Gray Surface resistivity...
More info
VinylStat D – Homogeneous Vinyl ESD Table Mat – 0.0625″ Thick
Image
Homogenous ESD Table Mat Surface resistivity is 10^7 – 10^8 Available in Blue or Gray Full 50′ rolls are available for purchase online, please fill out a Quote Request form...
More info
VinylStat E – 3 Layer Table Mat w/ Foam Back – 0.375″ Thickness
VinylStatE-three-layer-esd-vinly-foam-mat
Provides extra cushion for component safety and operator comfort. Thickness: 0.375″ Three layers vinyl with excellent ESD protection Resistant to degradation by acids, reducing agents, detergent solutions, alcohols, aliphatic hydrocarbons,...
More info
LM1000 – ESD Laminate Worksurface
LM1000 ESD Laminate Worksurface
Extremely durable ESD laminate that protects your sensitive items from ESD as well as your work surface from wear and tear. A High Pressure Laminate (HPL) which are manufactured under...
More info
IDP-STAT® MT5500 Series: Cleanroom ESD Table Mats
Image
Extremely durable ESD mat that protects your sensitive items as well as your work surface Compatible with  cleanrooms: Ultra-low outgassing, non-VOC, non-blooming and No Particle Generation Made with IDP-STAT Alloy –...
More info
ESD Safe Shelf Liners – Durable ESD Rubber
ESD Rubber Pre-Cut Table Mats
Available in Various Sizes of Ready-Made Shelf Liners Durable  Two Layer Rubber in Two Thicknesses: 0.080″ or 0.060″ Excellent Resistance to Wear and Tear. Colors Available: Nasa Blue, Royal Blue,...
More info
TM33200 – ESD Tray Liner – 16×24
Image
Line process trays with an ESD safe surface Provides cushioning and durability Fits a 16″x 24″x 0.060″tray Available in Light Blue, Royal Blue, Gray and Green...
More info
CAL1000 – Calibration Verification Device
CAL1000
Verify ESD meters are calibrated and in proper working order Precision resistor box Passive – Does not require power Verifies Transforming Technologies GTS600K, GTS900K, SRM310, SRM500K and many others....
More info
VinylStat FM2 ESD Anti-Fatigue Floor Matting
Image
Reduces worker discomfort by providing a soft surface to stand on. Provides a path-to-ground for ESD footwear Available in workstation mats, or full rolls for long runners High grade 3/8″...
More info
VinylSTAT FM3 Anti-Static ESD V-Groove Matting
VinylSTAT FM3 Floor Matting
A V-Groove emboss provides a non-slip surface that provides excellent traction Provides a dissipative ESD surface that protects the floor beneath. Very resilient, allowing it to stand up to heavy foot...
More info
VinylSTAT FM4 – Anti-Static ESD Chair Mats and Floor Runners
Anti-Static ESD Chair Mats
Durable anti-static esd chair mat provides a rigid ESD floor runner or chair mat for rolling chairs Available full rolls or floor runners in custom lengths Meets ANSI/ESD STM7.1. Available...
More info
FM53X4EP – ComfortDOME ESD Anti-Fatigue Mat – Interlocking End Piece – 3’x4′
Image
Provides an Anti-Fatigue, Energizing Surface to Stand On. Evenly spaced ComfortDOMES on the surface of the mat provides superior anti-fatigue relief and slip resistance. Interlocking End Piece – Used to...
More info
FM53X4IC – ComfortDOME ESD Anti-Fatigue Mat – Interlocking Center Piece – 3’x4′
Image
Provides an Anti-Fatigue, Energizing Surface to Stand On. Evenly spaced ComfortDOMES on the surface of the mat provides superior anti-fatigue relief and slip resistance. Interlocking Center Piece – Used to...
More info
FM53X4 ComfortDOME ESD Anti-Fatigue Mat – 3’x4′
Image
Provides an Anti-Fatigue, Energizing Surface to Stand On. Evenly spaced ComfortDOMES on the surface of the mat provides superior anti-fatigue relief and slip resistance. Single work area mats- sizes: 3’x4′...
More info
FM52X3 ComfortDOME ESD Anti-Fatigue Mat – 2’x3′
Image
Provides an Anti-Fatigue, Energizing Surface to Stand On. Evenly spaced ComfortDOMES on the surface of the mat provides superior anti-fatigue relief and slip resistance. Single work area mats- sizes: 2’x3′...
More info
FM66036BK ComfortGEL Cleanroom ESD Anti-Fatigue Mats – 3’x5′ – Black
Image
Made with rubberized gel foam for maximum softness and cushioning Exceptional comfort and long-term performance Static dissipative Specially formulated antimicrobial and antibacterial material to promote cleanliness Washable to clean room level 100...
More info
CTM Series – Cleanroom Sticky Mat
Tacky Mats White
Control contamination from footwear in your workplace with cleanroom sticky mats Keep controlled environments / sanitary-sensitive areas free and clear of foreign substances Remove and trap unwanted dirt, dust and...
More info
CTM Series – Cleanroom Sticky Mat Aluminum Frame
Cleanroom Sticky Mat Aluminum Frame
Moveable, Secure Base for Tacky mats Anodized Aluminum Edges With Beveled Edges, Non-Skid Bottom For Traffic Clean Finished Look to Improve Tacky Mat Appearance Keep Controlled Environments Free and Clear...
More info
CTM Series – Cleanroom Sticky Mats
CTM Series Sticky Mats
Control contamination from footwear in your workplace with cleanroom-safe sticky mats Used on entryways, walkways, high-traffic and other areas where particle contamination is to be controlled. Keep controlled environments /...
More info
Sticky Mat Mounts
Sticky Mat Mount
Sticky Mat Mounts are for use with cleanroom-safe sticky mats in areas that do not allow adhesion directly to the floor surface. The mounts are constructed of a hard, rigid, polystyrene...
More info
FM62436BK ComfortGEL Cleanroom Gel Foam Anti-Fatigue Mats – 2’x3′
Image
Made with rubberized gel foam for maximum softness and cushioning Exceptional comfort and long-term performance Static dissipative Specially formulated antimicrobial and antibacterial material to promote cleanliness Washable to clean room level 100...
More info
FM62036BK ComfortGEL Cleanroom Gel Foam Anti-Fatigue Mats – 20″x3′
Image
Made with rubberized gel foam for maximum softness and cushioning Exceptional comfort and long-term performance Static dissipative Specially formulated antimicrobial and antibacterial material to promote cleanliness Washable to clean room level 100...
More info
VinylSTAT FM7 ESD Conductive Chair Mats and Floor Runners
ESD Conductive Chair Mats
Provides an ESD Surface for Perfect for Wheeled Items like Chairs or Carts Permanently Conductive Made from Durable Rigid Vinyl Available in Rolls and Runners Made in the USA...
More info
FM8 TileSTAT Interlocking ESD Rubber Anti-FatigueTiles – 3’x3′
FM8 TileSTAT Interlocking ESD Rubber Anti-Fatigue Tiles
Heavy duty, durable ESD mat constructed of conductive nitrile rubber For use in general use or harshest environments. Solid pebble embossed surface for improved traction 3ft x 3ft interlocking mats...
More info
FM9C ComfortTREAD Diamond-Plate Anti-Fatigue ESD Mat – Interlocking Center Piece
Image
Provides an Anti-Fatigue, Energizing Surface to Stand On. Specially spaced diamond treads on the surface of the mat provide excellent traction Available in interlocking sections to create runners in custom lengths...
More info
FM9E ComfortTREAD Diamond-Plate Anti-Fatigue ESD Mat – Interlocking End Piece
Image
Provides an Anti-Fatigue, Energizing Surface to Stand On. Specially spaced diamond treads on the surface of the mat provide excellent traction Available in interlocking sections to create runners in custom lengths...
More info
FM103X32 – FM10 GrooveSTAT Conductive ESD V-Groove Rubber Matting – Full Roll – 3×32
Image
ESD Floor Mat Runners are designed to provide safe footing with minimum movement in any environment. ESD Floor Runners are ideal for numerous production locations, walkways, parts counters, lab areas and...
More info
FM104X32 – FM10 GrooveSTAT Conductive V-Groove Rubber Matting – Full Roll – 4×32
Image
ESD Floor Mat Runners are designed to provide safe footing with minimum movement in any environment. ESD Floor Runners are ideal for numerous production locations, walkways, parts counters, lab areas and...
More info
FM10 GrooveSTAT Conductive V-Groove Rubber Matting – Mats
Image
ESD Floor Mat Runners are designed to provide safe footing with minimum movement in any environment. ESD Floor Runners are ideal for numerous production locations, walkways, parts counters, lab areas and...
More info
CM320 Spartan Pro ESD Continuous Monitor, Two Operators & One Worksurface
CM320 - Spartan Pro - Single Wire Constant Monitor
Ensure ESD Protection: Ensure your ESD Workstation is Static-Safe by Continuously Checking Two Single Wire Wrist Straps & One Worksurface Compatibility: Compatible with Most Standard Single Wire Wrist Straps Alarms: Audible and...
More info
CM310 – Spartan Two – Single Wire Continuous Monitor, One Operator & One Worksurface
CM310 - Spartan Two - Single Wire Constant Monitor
Ensure ESD Protection: Ensure your ESD Workstation is Static-Safe by Continuously Checking One Single Wire Wrist Strap & One Worksurface Compatibility: Compatible with Most Standard Single Wire Wrist Straps Alarms: Audible and...
More info
Spartan One – CM300 Single Wire Continuous Monitor – One Operator
CM300 - Spartan One ESD Constant Monitor
Ensure ESD Protection: Ensure your ESD Workstation is Static-Safe by Continuously Checking One Single Wire Wrist Strap Compatibility: Compatible with Most Standard Single Wire Wrist Straps Alarms: Audible and Visual Alarms Indicate...
More info
CM400 – Single Wire Continuous Monitor, One Operator Only
CM400 ESD Single Wire Constant Monitor
Eliminate the need to test ESD wrist straps prior to the shift and stop failures of ground equipment during the work day Continuously checks the functioning  of one single wire...
More info
CM410 – Single Wire Continuous Monitor, One Operator, One Workstation Mat
CM410 ESD Single Wire Constant Monitor
The CM410 Monitors Your Wrist Strap and Worksurface So That You Are Properly Grounded and Safe from ESD Damage. Elimates Time Consuming Testing of ESD Wrist Straps and Worksurface with...
More info
CM420 – Single Wire Continuous Monitor, Two Operators, One Workstation Mat
Image
Monitors Two Operators and One Workstation Mat Easy To Use: Simply Plug In Wrist Strap Audible and Visual Alarms Factory Calibrated with Certificate – Does Not Require Recalibration...
More info
RangerTWO Dual Wire Constant Monitor – Model CM1602
RangerTWO Dual Wire Constant Monitor
Monitors one dual wire wrist strap and one ESD work surface for ESD Compliance Uses accurate resistance based monitoring technology Easy to use and economical Uses an ultra-low voltage signal...
More info
RangerONE Dual Wire Constant Monitor – Model CM1601
Image
CAPABILITIES: Monitors 1 dual wire wrist strap and will alarm if resistance exceeds 35 meg. This scaled back monitor lowers the cost of dual wire monitoring. SUPERIOR TECHNOLOGY: Uses accurate dual conductor resistance...
More info
ESD Workstation Kits – Dual Wire CM1602
Image
• Complete ESD Workstation Kit • Monitors One Dual Wire Wrist Strap, and One Work Surface • Two Layer Rubber: Excellent Resistance to Hold Solders, Soldering Irons and Most Solvents...
More info
RangerPRO Dual Wire Constant Monitor – CM1600
RangerPRO - Dual Wire Constant Monitors
CAPABILITIES: One device that can monitor your entire workstation: Two wrist straps; Two work surfaces and Two auxiliary grounds SUPERIOR TECHNOLOGY: Uses accurate dual conductor resistance monitoring technology to ensure ESD protection...
More info
RangerNET Dual Wire Constant Monitor – Model CM2815
Image
Monitors two dual wire wrist straps and two worksurfaces Uses resistance based monitoring technology Ultra-low voltage signal Conductive metal case Audible and visual alarm indicators Network-ready for use in the...
More info
RangerBOSS Dual Wire Constant Monitor – Model CM2800
Image
Monitors two dual wire wrist straps, two worksurfaces, two auxiliary grounds, and  operator voltage Uses resistance based monitoring technology Ultra-low voltage signal Conductive metal case Alarms are selectable with software Network-ready...
More info
CM2015 Periodic Verification Tool
Image
Periodic Verification Tool for the Resistance Ranger Constant Monitors Quickly Verify That Constant Monitors are Calibrated and Operating according to Specifications Resistor Box Containing 5% Fixed Precision Resistors...
More info
CM410PV – Periodic Verification Tool For CM400 and CM410
Image
Periodic Verification Tool For CM400 and CM410 Verfies that the constant monitor is in proper working order. Factory calibrated.  No recalibration required. Comes with Certificate....
More info
CM420PV – Periodic Verification Tool For CM420
Image
Periodic Verification Tool For CM420 Constant Monitor Simulates Passing / Failing Wrist Straps and Worksurfaces The Tool Verifies That The Constant Monitors Are Working Properly...
More info
Alarm Relay for the Resistance Ranger Constant Monitors
CM RELAY for Constant Monitor
Use the CM-RELAY to add an external signal to your Resistance Ranger Series Constant Monitor. The CM-RELAY allows a signal such as a Light Tower or Alarm to be added...
More info
Resistance Ranger Plastic Wrist Strap Remote Jack – Replacement
Image
Replacement for your plastic Resistance Ranger Constant Monitor wrist strap remote jack. Compatible with the Resistance Ranger Series: CM1600 CM1601 CM1602 CM2800 CM2815...
More info
Resistance Ranger Metal Wrist Strap Remote Jack
Metal Remote Jack
Metal wrist strap remote jack for Resistance Ranger Series Constant Monitor More durable than plastic version...
More info
Ground Cord for the CM400, CM410, and CM420 Constant Monitors
CM410-GND-ground-cord-for-CM400-CM410+CM420
A replacement ground cord for the CM400 Series Constant Monitors. Allows the CM400 Series to monitor the ground connection of the worksurface mat. Compatible with model number CM400, CM410, CM420 constant...
More info
CP3000 parking jack for Dual Wire Constant Monitors and Wrist Straps
Image
Provides a jack to “park” your wrist strap when you need to leave the workstation Compatible with model number CM1600, CM1601, CM1602, CM2815, CM2800 constant monitors from Transforming Technologies....
More info
CYCLOPS metal operator presence sensors – Stainless Steel Case
Stainless Steel Cyclops Wrist Strap Remote
CYCLOPS™ operator presence sensors for the Ranger Series Constant Monitor Produces an alarm if a person is within the protected work area and is not grounded by a wrist strap...
More info
CYCLOPS operator presence sensors
Image
CYCLOPS operator presence sensors for the Ranger Series Constant Monitor Produces an alarm if a person is within the protected work area and is not grounded by a wrist strap...
More info
Access PRO: PGT120 Tester and FastPass Turnstile System
PGT120K100 AccessPRO with FastPass
The PGT AccessPRO verifies the functionality of an operator’s wrist strap and footwear, logs the test results, and controls access to an ESD Protected Area. ESD Testing: The PGT120 tests the...
More info
Warmbier 7100.PGT120.COM Data Logging ESD Tester
Image
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem INTELLIGENT: A “Smart” ESD Combo tester that integrates with a computer...
More info
Warmbier PGT130.DT Data Logging ESD Tester With RFID
PGT130DT ESD Tester
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem INTELLIGENT: A “Smart” ESD Combo tester that records test results into...
More info
PGT120K110 ESD Tester, Non Data Logging, Wall Mount
Image
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem HANDS-FREE: Automatically test footwear in hands-free mode SIGNALS: Audibly and visually signal...
More info
PGT120K120 ESD Tester, Non Data Logging, Pedestal Stand
Image
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem HANDS-FREE: Automatically test footwear in hands-free mode SIGNALS: Audibly and visually signal...
More info
PGT120K130 ESD Tester, Non Data Logging, Standard Turnstile
Image
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem HANDS-FREE: Automatically test footwear in hands-free mode SIGNALS: Audibly and visually signal...
More info
PGT120K140 ESD Tester, Non Data Logging, FastPass Turnstile
Image
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem HANDS-FREE: Automatically test footwear in hands-free mode SIGNALS: Audibly and visually signal...
More info
PGT120K210 ESD Data Logging Tester, Data Terminal 2 with Wall Mount
Image
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem HANDS-FREE: Automatically test footwear in hands-free mode SIGNALS: Audibly and visually signal...
More info
PGT120K220 ESD Data Logging Tester, Data Terminal 2 with Pedestal Stand
Image
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem HANDS-FREE: Automatically test footwear in hands-free mode SIGNALS: Audibly and visually signal...
More info
PGT120K230 ESD Data Logging Tester, Data Terminal 2 with Standard Turnstile
Image
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem HANDS-FREE: Automatically test footwear in hands-free mode SIGNALS: Audibly and visually signal...
More info
PGT120K240 ESD Data Logging Tester, Data Terminal 2 with FastPass Turnstile
Image
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem HANDS-FREE: Automatically test footwear in hands-free mode SIGNALS: Audibly and visually signal...
More info
PGT120K310 ESD Data Logging Tester, Data Terminal 3 with Wall Mount
Image
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem HANDS-FREE: Automatically test footwear in hands-free mode SIGNALS: Audibly and visually signal...
More info
PGT120K320 ESD Data Logging Tester, Data Terminal 3 with Pedestal Stand
Image
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem HANDS-FREE: Automatically test footwear in hands-free mode SIGNALS: Audibly and visually signal...
More info
PGT120K330 ESD Data Logging Tester, Data Terminal 3 with Standard Turnstile
Image
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem HANDS-FREE: Automatically test footwear in hands-free mode SIGNALS: Audibly and visually signal...
More info
PGT120K340 ESD Data Logging Tester, Data Terminal 3 with FastPass Turnstile
Image
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem HANDS-FREE: Automatically test footwear in hands-free mode SIGNALS: Audibly and visually signal...
More info
PGT120K410 ESD Data Logging Tester, Data Terminal TC18 with Wall Mount
Image
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem HANDS-FREE: Automatically test footwear in hands-free mode SIGNALS: Audibly and visually signal...
More info
PGT120K420 ESD Data Logging Tester, Data Terminal TC18 with Pedestal Stand
Image
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem HANDS-FREE: Automatically test footwear in hands-free mode SIGNALS: Audibly and visually signal...
More info
PGT120K430 ESD Data Logging Tester, Data Terminal TC18 with Standard Turnstile
Image
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem HANDS-FREE: Automatically test footwear in hands-free mode SIGNALS: Audibly and visually signal...
More info
PGT120K440 ESD Data Logging Tester, Data Terminal TC18 with FastPass Turnstile
Image
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem HANDS-FREE: Automatically test footwear in hands-free mode SIGNALS: Audibly and visually signal...
More info
Warmbier 7100.PGT120 Combination Tester for Personal Grounding Equipment
Image
TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem HANDS-FREE: Automatically test footwear in hands-free mode SIGNALS: Audibly and visually signal...
More info
Warmbier 7100.PGT120.COM.DT2 Data Terminal For the PGT120.COM
Image
Data Logging: Turns the PGT120.COM tester into a “Smart” ESD Combo tester that integrates with a computer to record test results into a database. Access:  Test information can be accessed...
More info
Warmbier 7100.PGT120.COM.DT3 Data Terminal with RFID For the PGT120.COM
Data Terminal DT3
Turns the PGT120.COM tester into a “Smart” ESD Combo tester that integrates with a computer to record test results into a database Built-in RFID reader that can be used for...
More info
PDT800K Deluxe “Near -Fail” Combo Wrist Strap and Footwear Testing Station
PDT800K Combo ESD Tester
Combination Grounding Tester: Easy, accurate, and time-saving one-touch digital ESD wrist strap and ESD footwear tester. Near-Fail Alert: “Near-Fail” alert that tells you when your grounding devices are nearing failing levels. LCD Readout:...
More info
GTS900K Premium Combination Wrist Strap and Footwear Testing Station
Image
Tests both ESD wrists straps and ESD footwear such as shoes and heel grounders to determine if the grounding device is functioning correctly. Split footplate design test both feet simultaneously and...
More info
GTS600K Combination Wrist Strap and Footwear Testing Station
Image
Provides accurate and reliable ESD testing at the best value Dual test circuits: test footwear or wrist straps Positive rocker switch LED’s lights and audible alarm signal test results Signals:...
More info
WST200 – ESD Wrist Strap Tester
Image
The WST200 is a time saving, portable wrist strap tester that is easy to transport to test that operators are properly grounded. Ensures that basic ESD protection is met by...
More info
7100.PGT.XK.V3- RFID Card Reader for the PGT120.COM Tester
7100PGTXKV3-2 - RFID Reader
The RFID Reader works with the PGT120.COM and allows employees to submit user IDs and other information from Company ID Cards during testing For use with the Wolfgang Warmbier PGT120.COM...
More info
SY910 – Facial Recognition System for the PGT120.COM Tester
SY910 Facial Recognition System
The Facial Recognition System for use with the PGT120.COM and allows employees to submit user IDs: Face, Pin, RFID –  during testing of ESD products No-touch technology for a hygienic...
More info
7100.PGT120.CU.12 Calibration Verification Device
Image
Designed to facilitate easy, in-house, calibration verification of Wolfgang Warmbier PGT120 Series ESD Combo Testers Verify that testers calibrated by simulating the pass/fail conditions of ESD grounding products With the...
More info
Warmbier 7100.PGT120.SE Pedestal Stand Kit for the PGT120 Series Tester
Image
Pedestal Stand for the Wolfgang Warmbier PGT120 Series ESD Combo Testers Allows your PGT120 tester to be free standing.  Works with the following Models PGT120 PGT120.COM PGT130.DT It comprises a...
More info
Warmbier 7100.PGT120.SM Mat for footwear electrode for PGT120 Tester
Image
Floor Mat for the Wolfgang Warmbier PGT120 Series ESD Combo Testers Works with the following Models PGT120 PGT120.COM A mat with bright yellow border NOTE:  Does not include the tester...
More info
Warmbier 7100.PGT120.WK Mounting Plate for the PGT120 Series Tester
Warmbier 7100.PGT120.WK Mounting Plate
Mounting plate for the Wolfgang Warmbier PGT120 Series ESD Combo Testers Works with the following Models PGT120 PGT120.COM Mount the PGT series testers on the wall or a bench NOTE: ...
More info
PDT78PV – Verification Unit for the PDT700K and PDT800K
PDT78PV
Verify that the PDT700K and PDT800K combo tester are operating correctly. Resistance Box with Fixed 5% Precision Resistors Selectable Test Range of 100K~1G....
More info
DC1185.IDP – Permanently Dissipative ESD Sheet Protectors – Nine Hole Punch
Image
Made with permanently dissipative IDP-STAT® PVC film Lightly embossed to reduce glare Resistant to print transfer Yellow stripe with ESD identification Typical Surface Resistivity: 10^9 – 10^10 9-Hole Punch.ectors – Nine Hole...
More info
SP0906 – Anti-static ESD Spudger
Image
Anti-static ESD Spudger for Electronics Applications and Soldering Flat (Screwdriver) End Notched End for Hooking Wires Pointed End to Form Leads, Probing and Holding Objects for Soldering Sold in 20...
More info
IDP Stat ESD Badge Holder
ESD Badge Holder
The IDP-STAT® ESD Badge Holders are an excellent way to shield employee badges, guest passes, or key cards. Permanently Dissipative – ESD Properties will Never Expire Resistance: 10^9-10^10 Hot Stamped...
More info
ESDCM1000 Anti-Static ESD Safe Computer Mouse
ESDCM1000 - Anti-Static ESD Mouse
Anti-Static ESD Safe Computer Mouse for use in Electrostatic Protected Areas. Permanent ESD properties with yellow ESD Symbol  2 Click Buttons + Finger Scroll, 1000 DPI  USB Connection, Plug & Play...
More info
ESDKB2000 Anti-Static ESD Safe Keyboard
Anti-Static ESD Safe Keyboard
Anti-Static ESD Safe Keyboard for Use with Computers in ESD Areas in Electronics Manufacturing, Semi-Conductors, PCS, LCD, SMT and Any Where That Static Electricity May Be of Concern. Made with...
More info
ESD Conductive Brushes
Image
Safety Clean PCB, SMT, LCD and Other Static Sensitive Materials Permanent ESD properties with Conductive Plastic and Fibers Several Styles and Sizes to Choose Meets industry requirements of ANSI/ESD S20.20...
More info
ESD Mat & Table Top Cleaner – Gallon
ESD Mat & Table Top Cleaner
ESD Mat & Table Top Cleaner: ideal cleaner for areas in which static-sensitive devices are assembled, tested, and handled, but can also be used in areas that require a mild...
More info
ESD Mat & Table Top Cleaner – Spray Bottle – Quart
ESD Mat & Table Top Cleaner
ESD Mat & Table Top Cleaner: ideal cleaner for areas in which static-sensitive devices are assembled, tested, and handled, but can also be used in areas that require a mild...
More info
ESD Solvent Bottles & Flux Dispensers
Image
High Density Polyethylene (HDPE) with Permanent ESD Properties BPA (Bisphenol A) Free Lightweight and Mobile Color: Blue ESD Symbol Printed on All Bottles Strong Seal to Prevent Leaks Bottle Measurements...
More info
Static Care Topical Antistat Coating
Image
Provides effective cleaning and long term protection from static electricity buildup For use on: anti-static mats, carpet, assembly and work surfaces and more SAFETY DATA SHEET...
More info
DC2000 ESD Safe Pens
Image
ESD safe pen compatible with clean rooms and other controlled areas Printed with an ESD symbol in yellow Fine point Available with black, blue and red Sold in 10 packs....
More info
WP8200 – Cleanroom Safe ESD Inspection Wiper – 9″x9″
WP8200 ESD Inspection Wiper
Black Anti-Static Cleanroom Wipers are perfect for the cleaning and final inspection of sensitive components in controlled environments. Visually inspecting the wipe is the quickest and easiest way to check...
More info
WP7200 – Cleanroom Safe ESD Polyester Wiper – 9″x9″
WP7200-anti-static-clean-room-wiper-white-striped
Ideal for wiping exterior areas of products in ESD-sensitive areas as well as cleaning of process tools and other equipment. Made out of 100% continuous polyester filaments with conductive carbon...
More info
BEMCOT M-3 – Static Dissipative Cleanroom Wipers
Image
BEMCOT M-3 wipers are for quick and easy wiping in cleanrooms and other working environments that demand the lowest levels of lint and particles Made out of cotton into a...
More info
WP6200 Static Dissipative ESD Wipers
WP6200 Static Free Wiper
ESD & CLEANROOM SAFE: Static dissipative ESD wipes are perfect for all electronic manufacturing and optical cleaning applications PREMIUM MATERIALS: Constructed with 100% knitted polyester that are continuously filamented that...
More info
ESDC1003C – Anti-Static ESD Curtains
ESD Curtain
CONTROL: ESD curtains are an ideal barrier wall for sensitive environments such as cleanrooms and control manufacturing environments. ANTI-STATIC: The honeycomb conductive scrim grounds static charges in the area to maintain...
More info
ESD Sign – 17″x22″ – “Attention – ESD Control Area” – 5pack
ESD Sign - 17"x 22"
ESD signs notify visitors and workers of the precautions necessary for these areas Sign reads: “Attention – ESD Control Area – Wear Grounding Devices At All Times – This Area...
More info
LB9191 / LB9201 ESD Label
Image
ESD label printed with “Caution Computer Material Enclosed Do Not Bend or Expose To X-Rays. Excessive Heat, Cold or Humidity Radioactive Materials. Static Electricity of Magnets. Exposure To Any Of...
More info
LB9170 / LB9180 ESD Label
Image
ESD label printed with “Attention Contents Static Sensitive Handling Precautions Required” Size: 1-3/4″ x 2-1/2″ Specifications: LABELS PER ROLL: 500 BACKING: PAPER THICKNESS: 3.8 MIL OPACITY: 88.5% BRIGHTNESS: 90% BASIS...
More info
LB9141 / LB9142 ESD Label
Image
ESD label printed with “Attention: Static Sensitive Devices. Handle Only at Static Safe Work Stations” Size: 1-3/4″ x 2-1/2″, 4″ x 4″ Specifications: LABELS PER ROLL: 500 BACKING: PAPER THICKNESS:...
More info
LB9090 / LB9100 ESD Label
Image
ESD label printed with “Caution Sensitive Electronic Devices Do Not Ship or Store Near Strong Electrostatic, Electromagnetic, Magnetic or Radioactive Fields” Size: 4″ x 4″, 2″ x 2″ Specifications: LABELS...
More info
RBC Series Black Conductive Rubber Bands
Image
Conductive rubber bands are specially manufactured to handle the problem of static in the semiconductor and electronics industry. Conductive rubber bands are use to bundle and protect ESD sensitive IC...
More info
RB Series Pink Anti-Static Rubber Bands
Image
Anti-Static rubber bands are use to bundle and protect ESD sensitive IC tubes, trays, boxes and carriers quickly and safely. Made with Vulcanized Natural Rubber Surface Resistivity: 10^9 ohms/sq Static...
More info
MP7575 – Anti-Static ESD Mouse Pad
ESD Safe Mouse Pad
Anti-Static ESD Mouse Pad can be used in anywhere that ESD or static control is a concern Does not produce a significate static charge – ESD Safe! A commonly overlooked...
More info
LB9110 / LB9120 ESD Label
Image
ESD label printed with “Attention Contents Static Sensitive Handling Precautions Required. Contents: ______” Size: 1-3/4″ x 2-1/2″, 1″ x 1-1/2″ Specifications: LABELS PER ROLL: 500 BACKING: PAPER THICKNESS: 3.8 MIL OPACITY:...
More info
LB9130 / LB9140 ESD Label
Image
ESD label printed with “Attention: Static Sensitive Devices. Handle Only at Static Safe Work Stations” Size: 1-3/4″ x 2-1/2″, 1″ x 1-1/2″ Specifications: LABELS PER ROLL: 500 BACKING: PAPER THICKNESS: 3.8...
More info
LB9082 / LB9083 ESD Label
Image
ESD label printed with “Attention Observe Precautions for Handling  Electrostatic Sensitive Devices” Size: 2″ x 2″, 4″ x 4″ Specifications: LABELS PER ROLL: 500 BACKING: PAPER THICKNESS: 3.8 MIL OPACITY: 88.5%...
More info
LB9080 / LB9081 ESD Label
Image
ESD label printed with “Attention Observe Precautions for Handling  Electrostatic Sensitive Devices” Size: 2″ x 2″, 4″ x 4″ Specifications: LABELS PER ROLL: 500 BACKING: PAPER THICKNESS: 3.8 MIL OPACITY: 88.5%...
More info
LB9070 ESD Label
Image
ESD label printed with “This Station or Equipment is Static Safe” Size: 1-3/4″ x 3″ Permanent adhesive 500 per roll...
More info
LB9060 ESD Label
Image
ESD label printed with “Electrostatic Sensitive Devices Do Not Open or Handle Except At A Static Free Workstation” Sizes: 1″ x 2-1/2″ Permanent adhesive 500 per roll...
More info
LB9010 ESD Label
Image
ESD label printed with “Attention Sensitive Devices Handle Only At Static Safe Work Stations” Size: 5/8″ X 2″ Permanent adhesive 500 per roll...
More info
LB9020 ESD Label
Image
ESD label printed with “Attention Electrostatic Sensitive Devices” Size: 3/8″ X 1-1/4″ Permanent adhesive 500 per roll...
More info
LB9030 ESD Label
Image
ESD label printed with “Attention Observe Precautions for Handling Electrostatic Devices”  Size: 5/8″ X 2″ Permanent adhesive 500 per roll...
More info
LB9040 ESD Label
Image
ESD label printed with “Caution Sensitive Electronic Devices Do Not Open Except at Approved Field Force Protective Work Station” Size: 5/8″ X 2″ Permanent adhesive 500 per roll...
More info
LB9050 ESD Label
Image
ESD label printed with “Caution Sensitive Electronic Devices Do Not Ship or Store Near Strong Electrostatic, Electromagnetic, Magnetic, Fields” Size: 5/8″ X 2″ Permanent adhesive 500 per roll...
More info
MC1221W – ESD Safe Microscope Covers
Image
ESD Safe Microscope Cover Does not produce a significate static charge – ESD Safe! Helps to keep microscopes free of dust Permanently anti-static – Less than 10^6 Made with polyester...
More info
ESD Workstation Covers – Three Sizes
Image
Provides ESD protection for sensitive processes and components Groundable for added safety – 4MM Snap Made with polyester with conductive yarn ESD-safe logo designates safe to use in ESD protective environment...
More info
ESD Safe SMD Component Storage Box Cabinet – Conductive Plastic
Image
Keep you surface mount components organized and safe from ESD with the SMD storage system. Perfect for engineering labs, electronics manufac-turing and automotive applications. ESD safe container for small surface...
More info
ESD Safe SMD Component Storage Boxes, Conductive Plastic – Black Lids
Image
Made of volume loaded conductive polystyrene Tray compatible size combination Spring loaded lid Complies with EN 61340-5-1 Suitable for compartmented box type SMD810  Color: Black Recyclable...
More info
ESD Safe SMD Component Storage Boxes, Conductive Plastic – Clear Lids
Image
Made of volume loaded conductive polystyrene Tray compatible size combination Spring loaded lid Complies with EN 61340-5-1 Suitable for compartmented box type SMD810  Color: Black Recyclable...
More info
Guardian Grid Tape – CT2406 – Conductive Grid Tape – 1in Wide x 36m
tape-ct-series-esd-conductive-grid-tape
Guardian Grid Tape is used in ESD sensitive environments in the static free workstations that requires EMI Shielding or ESD Control. A conductive grid layer is buried between two layers of...
More info
Guardian Grid Tape – CT1204 – Conductive Grid Tape – 1/2in Wide x 36m
tape-ct-series-esd-conductive-grid-tape
Guardian Grid Tape is used in ESD sensitive environments in the static free workstations that requires EMI Shielding or ESD Control. A conductive grid layer is buried between two layers of...
More info
High Temperature ESD Masking Tape- CH1200 – 1/2in Wide x 72yds
CH1200 esd high temp masking tape
High Temperature Masking Tape is applied in automotive repair ships and demanding industrial applications. High Temp Masking Tape is a premium grade crepe paper masking tape coated with a natural...
More info
Guardian Grid Tape – CT1805 – Conductive Grid Tape – 3/4in Wide x 36m
tape-ct-series-esd-conductive-grid-tape
Guardian Grid Tape is used in ESD sensitive environments in the static free workstations that requires EMI Shielding or ESD Control. A conductive grid layer is buried between two layers of...
More info
Guardian Grid Tape – CT4807 – Conductive Grid Tape – 2in Wide x 36m
tape-ct-series-esd-conductive-grid-tape
Guardian Grid Tape is used in ESD sensitive environments in the static free workstations that requires EMI Shielding or ESD Control. A conductive grid layer is buried between two layers of...
More info
CL1801-P Anti-Static Cellulose Tape – Printed with ESD Symbol – 3/4in x 72yd
Image
Used for general purpose mending, binding packaging and carton sealing. Static-safe clear cellulose tape with ESD symbols in black print Thickness: 2.4 mil thick Charge decay of <.014 seconds. Available...
More info
CL4803-P Anti-Static Cellulose Tape – Printed with ESD Symbol – 2in x 72yd
Image
Used for general purpose mending, binding packaging and carton sealing. Static-safe clear cellulose tape with ESD symbols in black print Thickness: 2.4 mil thick Charge decay of <.014 seconds. Available...
More info
CL2402-P Anti-Static Cellulose Tape – Printed with ESD Symbol – 1in x 72yd
Image
Used for general purpose mending, binding packaging and carton sealing. Static-safe clear cellulose tape with ESD symbols in black print Thickness: 2.4 mil thick Charge decay of <.014 seconds. Available...
More info
CL1200-P Anti-Static Cellulose Tape – Printed with ESD Symbol – 1/2in x 72yd
Image
Used for general purpose mending, binding packaging and carton sealing. Static-safe clear cellulose tape with ESD symbols in black print Thickness: 2.4 mil thick Charge decay of <.014 seconds. Available...
More info
CL4803 Clear ESD Anti-Static Tape – 2in x 72yd
Image
Used for general applications in static free workstations. Static-safe clear cellulose tape Thickness: 2.4 mil thick Charge decay of <.014 seconds. Available on 3″ cores Also available in 1/2in, 3/4in,...
More info
Cl2402 Clear Anti-Static Cellulose Tape – 1in x 72yd
Image
Used for general applications in static free workstations. Static-safe clear cellulose tape Thickness: 2.4 mil thick Charge decay of <.014 seconds. Available on 3″ cores Also available in 1/2in, 3/4in,...
More info
Cl1801 Clear Anti-Static Cellulose Tape – 3/4in x 72yd
Image
Used for general applications in static free workstations. Static-safe clear cellulose tape Thickness: 2.4 mil thick Charge decay of <.014 seconds. Available on 3″ cores Also available in 1/2in, 3/4in,...
More info
CL1200 Clear Anti-Static Cellulose Tape – 1/2in x 72yd
Image
Used for general applications in static free workstations. Static-safe clear cellulose tape Thickness: 2.4 mil thick Charge decay of <.014 seconds. Available on 3″ cores Also available in 1/2in, 3/4in,...
More info
AM3602 ESD Aisle Marking Yellow Vinyl Tape – 3in Wide x 36 yd
ESD Aisle Marking Tape
ESD Aisle Marking Tape allows you to visually mark the areas requiring static protective measures. Bright yellow vinyl floor tape with bold black text with ESD symbols Print reads: ESD:...
More info
AM2401 ESD Aisle Marking Yellow Vinyl Tape – 2in Wide x 36 yd
ESD Aisle Marking Tape
ESD Aisle Marking Tape allows you to visually mark the areas requiring static protective measures. Bright yellow vinyl floor tape with bold black text with ESD symbols Print reads: ESD:...
More info
FSM2424RSG – Red ESD Field Service Mat w/Hardware – 2′ x 2′
Image
Complete kit for servicing ESD items in the field Size: 24″ x 24″ with two 8″ x 12″ pockets Includes a FM2000 ground/coil combo cord Comes with an WB0016 adjustable blue fabric...
More info
FSM2424BSG – Blue ESD Field Service Mat w/Hardware – 2′ x 2′
Image
Complete kit for servicing ESD items in the field Provides service personnel with a static free work area for handling ESD sensitive parts Size: 24″ x 24″ with two 8″ x...
More info
FSM2424B – Blue ESD Field Service Mat w/Hardware – 2′ x 2′
Image
Complete kit for servicing ESD items in the field Size: 24″ x 24″ with two 8″ x 12″ pockets Includes 1 CP1518BD ground cord with a bull dog clip Comes with...
More info
FSM2424R – ESD Field Service Mat w/Hardware – 2′ x 2′
Image
Complete kit for servicing ESD items in the field Size: 24″ x 24″ with two 8″ x 12″ pockets Includes 1 FM2000 ground cord with a bull dog clip Comes with...
More info
ESD Socks: Works Great with ESD Shoes and Heel Grounders
Image
ESD socks ensure electrical contact between the body and ESD footwear. Toe and heels of the socks are reinforced with conductive yarn. Made with polyester, spandex and conductive yarn....
More info
GK1000 ESD Table Mat Grounding Kit
GK1000 ESD Table Mat Grounding Kit is an easy to install snap to ground ESD table matting and up to two ESD wrist straps.
Easy to install kit for grounding ESD table mats Includes 15ft low profile ground cord, and a universal snap Universal snap kit easily installs a ground snap into a range of mat...
More info
FM2525NR ESD Table Mat Interconnect Ground Cord
FM2525NR Table Mat Interconnect Ground Cord
The FM2525NR ground cord is used to interconnect two monitored work surfaces when unable to connect individually to ground. Comes with two molded low profile mushroom caps with 3/8” (10mm)...
More info
GK2000 ESD Floor Mat Grounding Kit
Image
ESD Floor Mat Grounding Kit includes everything needed to properly ground an anti-static ESD floor matting Includes 15ft low profile ground cord, and a 10mm universal snap that can work...
More info
CP1518 Common Point Ground, 15ft Long, with a 10mm Male Snap, 1 Meg Resistor
Image
A versatile Common Point Ground Cord that connects multiple aspects of an ESD workstation to ground. Equipped with two standard banana jacks – Grounds up to two operators at the...
More info
CP1518-BD Common Point Ground with Bull Dog Clip, 15ft, 10mm Female, 1 meg
Image
Common point ground cord best used with a field service kit Bull dog grounding clip for a solid but temporary connection to ground Cord Length: 15ft Snap: 10mm Female Snap...
More info
CP2522: Low Profile Common Ground Point Cord,10mm Male, 1 Meg
Low profile common point ground cord
Common point ground cord for two wrist straps and ESD mat Low profile molded head with 10mm male snap Length: 15ft long 1meg resistor for safety (available without resistor) 10mm female...
More info
CP2522NR: Low Profile Common Ground Point Cord,10mm Male, No Resistor
Low profile common point ground cord
Common point ground cord for two wrist straps and ESD mat Low profile molded head with 10mm male snap Length: 15ft long Does not include a resistor (available with a...
More info
CP2524: Low Profile Common Ground Point Cord,10mm Female Snap, 1 Meg
Low profile common point ground cord
Common point ground cord for two wrist straps and ESD mat Low profile molded head with 10mm female snap Length: 15ft long 1meg resistor for safety (available without resistor) Cords available...
More info
CP4070- Metal Bench Mount Ground Cord
Image
Provides a common grounding point for one or two wrist straps Specially designed for use at ESD workstations and ESD table mats Mounts under workbench with two included screws. Provides...
More info
CP4822: Quad Common Point Ground Cords
Image
COMMON POINT GROUND: Provides four banana jack receptacles for a ground point for wrist straps, coil cords, matting or accessories in the area: DESIGN: Made with a low profile, molded head to...
More info
FM1515NR Low Profile Floor Mat Ground Cord – Male Snap, 15ft Long – No Resistor
Image
All-Purpose: A universal ground cord for ESD Floor Mats.  Can also be used with ESD table mats if banana jacks for wrist straps are not needed. Safety: Low profile molded...
More info
FM1517 Low Profile ESD Floor Mat Ground Cord – Female Snap, 15ft Long
Image
All-Purpose: A universal ground cord for ESD Floor Mats.  Can also be used with ESD table mats if banana jacks for wrist straps are not needed. Safety: Low profile molded...
More info
FM1515 Low Profile ESD Floor Mat Ground Cord – Male Snap, 15ft Long
Image
All-Purpose: A universal ground cord for ESD Floor Mats.  Can also be used with ESD table mats if banana jacks for wrist straps are not needed. Safety: Low profile molded...
More info
FM2000 Center Snap Common Point Ground Cord System
Image
The FM2000 field service ground cord reduces the number of cords to carry with a field service kit. Unique large center snap and two grounding connections allow for grounding of...
More info
OCT300 – Outlet Circuit Tester
Image
Designed to detect the most common wiring problems in standard receptacles Plug in and observe red or amber indicators Detects faulty wiring in a three wire receptacle UL listed...
More info
AC1000 – Metal Alligator Clips for Banana Plugs
Image
High quality alligator clip for grounding items such as ESD wrist straps and coil cords. Connects to a standard banana plug Material: stainless steel Sold in bags of 10...
More info
CS1090 ESD Universal Snap Kit, 10mm
Image
Universal snap kit easily installs a ground snap into a range of mat thicknesses User installable with a screwdriver Installs a 10 mm snap or stud to ESD workstation materials Includes 2 screws...
More info
CS0122-Stud – Rivet Ground Snap – Stud
Image
Installs a 10mm stud into ESD workstation materials Creates a solid connection with wide screw base that sandwiches the material Requires a snap tool to install...
More info
CS0123 – Snap Screw Set – 10mm
Image
Installs a 10mm stud into ESD workstation materials Creates a solid connection with wide screw base that sandwiches the material Quickly un-installs so you can reuse the snap...
More info
CS0122-Socket – ESD Mat Rivet Ground Snap – Socket
Image
Installs a 10mm socket into ESD workstation materials Creates a solid connection with wide screw base that sandwiches the material Requires a snap tool to install...
More info
CS0125 – Ring Terminal Banana Jack
Image
A high-quality ring terminal that accepts standard banana jack. Can be used to add a ground point for items in electronics. Material: Copper with chrome Ring Size: 1/4 (0.125”)...
More info
CS0126-Socket – Stacking Snap Adapter – 10mm Socket
CS0126-socket-stacking-snap
Adds a banana jack receptacle to a 10mm stud, typically on an ESD mat. Easily connect a wrist strap, ground cord, or constant monitor and they are great for grounding...
More info
CS0126-Stud – Stacking Snap Adapter – 10mm Stud
CS0126-stud-stacking-snap
Adds a banana jack receptacle to a 10mm socket, typically on an ESD mat. Easily connect a wrist strap, ground cord, or constant monitor and they are great for grounding...
More info
CS0126-STUD/SOCKET Universal Stacking Snap Adapters
Image
Universal snap adapter – can connect to both studs and sockets Adds a banana jack to a 10mm snap or stud, typically on an ESD mat. Easily connect a wrist...
More info
CS0127 Molded Banana Jack Snap
Image
Add a banana jack to any surface with a 10mm ground snap.. Molded plastic body with metal snaps Most most banana plugs will fit the jack Use with coil cords,...
More info
CS0128-Socket 10mm Snap Adapter Set
CS0128-Stud
The CS0128 is a steel adapter that has a double 10mm stud construction. Used to convert 10mm snaps, primarily with anti-static matting and ground cords Snap adapter that connects a...
More info
CS0128-Stud 10mm Snap Adapter Set
CS0128 Socket - Socket-to-Socket Adapter
The CS0128 is a steel adapter that has a double 10mm socket construction. Used to convert 10mm snaps, primarily with anti-static matting and ground cords Snap adapter that connects a...
More info
CS1020 Push and Clinch Grounding Snaps – 10mm Male Stud
CS1020 -10mm Male Stud
ESD PROTECTION: The CS1020 is an easy to install 10mm grounding snap for ESD matting. INSTALLATION: The “Push and Clinch” prongs are pushed ESD materials and the prongs are bent...
More info
CS1010 Push and Clinch Grounding Snaps – 10mm Female Socket
CS1010 - 10mm Female ESD Snap
ESD PROTECTION: The CS1010 is an easy to install 10mm grounding snap for ESD matting. INSTALLATION: The “Push and Clinch” prongs are pushed ESD materials and the prongs are bent...
More info
AD22 Banana Jack Outlet Adapter
Image
Converts standard three-prong USA outlets into a ground point for ESD protective equipment such as wrist strap and ground cords. Made of durable plastic which is also lightweight for easy...
More info
HG1360R – Heel Grounder – Stretch Hook and Loop Strap – Red
Image
MOST POPULAR! Ground mobile personnel with our long-lasting stretch Hook and Loop ESD heel grounders. LONG LIFE: The reversible cup design allows for longer life. When one side becomes worn, you can...
More info
HG1360 – Heel Grounder – Stretch Hook and Loop Strap – Black
Image
MOST POPULAR! Ground mobile personnel with our long-lasting Stretch Hook and Loop ESD heel grounders. LONG LIFE: The reversible cup design allows for longer life. When one side becomes worn, you can...
More info
HG1360B – Heel Grounder – Stretch Hook and Loop Strap – Blue
Image
MOST POPULAR! Ground mobile personnel with our long-lasting stretch Hook and Loop ESD heel grounders. LONG LIFE: The reversible cup design allows for longer life. When one side becomes worn, you can...
More info
HG1370 – Heel Grounder – Stretch Hook and Loop Strap Hi-Vis Orange
HG1370 Oarnge Cup Style ESD Heel-grounder
MOST POPULAR! Ground mobile personnel with our long-lasting stretch Hook and Loop ESD heel grounders. LONG LIFE: The reversible cup design allows for longer life. When one side becomes worn, you can...
More info
HG1390S – Hi-Vis Yellow ESD Heel Grounder – 1Meg
Image
Hi-Visibility: The hi-vis yellow/green strap can be easily seen Comfort: The hook and loop strap with an elastic side panel ensures a tight, comfortable fit Safety: A buried 1meg resistor...
More info
HG1360XL Extra Large ESD Heel Grounder – Stretch Hook and Loop Strap in Black – For Large Footwear
HG1360XL ESD Heel Grounder For Large Footwea
Ground mobile personnel with long-lasting stretch hook and loop ESD heel grounders Designed to fit larger sized footwear, such as men’s sized 12 and above. Reversible cup design allows for longer...
More info
HG1360NM2 – Non-Marking ESD Heel Grounders
HG1360NM Non Marking Heel Grounder
Clean: Made with ESD gray rubber that will not leave marks on floors Comfort: A stretch hook and loop closure straps ensure a solid, comfortable fit Safety: A buried 1meg resistor is...
More info
HG1341 – Standard Cup Style Blue Hook and Loop ESD Heel Grounder – 1Meg
HG1341
Standard Blue Hook and Loop ESD Heel Grounder Hook and loop closure Buried resistor 1.25″ cup design...
More info
HG1232 – Heel Grounder – Cup Style – Buckle Closure
Image
ESD grounding device for mobile personnel Buckle closure for tight fit Durable molded resistor for safety 35 mm reversible cup design increases heel grounders life Made with durable ESD rubber...
More info
HG1246 – Heel Grounder – D-Ring – 35 mm Cup – 1 Meg
Image
D-ring closure Durable molded resistor 35 mm cup design...
More info
HG1580NM – Heel Grounder – Non-marking- Buckle Closure – Sport Style – 1 Meg
Image
Sport Heel Grounders are ideal for boots and cross-training athletic shoes Moldable back strap which better grips shoes for a tighter fit A buckle closure ensures a tight and comfortable...
More info
HG1594 – Sport ESD Heel Grounders – D-Ring
Image
Sport Heel Grounders are ideal for boots and cross-training athletic shoes Moldable back strap which better grips shoes for a tighter fit D-Ring Closure High visibility rep color 1 Meg Resistor...
More info
HG1590 – Sport Heel Grounders – Hook and Loop Closure
Image
Sport Heel Grounders are ideal for boots and cross-training athletic shoes Moldable back strap which better grips shoes for a tighter fit A hook and loop closure ensures a tight...
More info
HG2520 – ESD Toe Grounders
Image
Perfect Fit for Odd Shaped Footwear Such as High Heels or Small Shoes Elastic Closure Molded Resistor...
More info
HG4560 – Disposable ESD Heel Grounders
Image
Low Cost Method of Grounding Temporary Personnell High Visibility Yellow Color Sold In Packs of 100 Disposable: Perfect for One Time Use...
More info
HG4560L – Disposable ESD Heel Grounders, 24″ Long
Image
Low-Cost Method of Grounding Temporary Personnel Extra Length is Perfect for Use with Boots or Other Odd Sized Footwear High Visibility Yellow Color Sold In Packs of 100 Disposable: Perfect...
More info
HG6032 – Full Coverage ESD Sole Grounders – Large – 2 Meg
Image
Full coverage sole grounders – 20 times the surface contact of heel grounders Wider and more consistent contact area ensures grounding Rapid and complete static dissipation due to constant contact through...
More info
HG6022 – Full Coverage ESD Sole Grounders – Medium – 2 Meg
Image
Full coverage sole grounders – 20 times the surface contact of heel grounders Wider and more consistent contact area ensures grounding Rapid and complete static dissipation due to constant contact through...
More info
HG6012 – Full Coverage ESD Sole Grounders – Small – 2 Meg
Image
Full coverage sole grounders – 20 times the surface contact of heel grounders Wider and more consistent contact area ensures grounding Rapid and complete static dissipation due to constant contact through...
More info
HG6052 – Full Coverage ESD Sole Grounders – Extra Small – 2 Meg
Image
Full coverage sole grounders – 20 times the surface contact of heel grounders Wider and more consistent contact area ensures grounding Rapid and complete static dissipation due to constant contact through...
More info
HG6030 – Full Coverage ESD Sole Grounders – Large – 1Meg
Image
Full coverage sole grounders – 20 times the surface contact of heel grounders Wider and more consistent contact area ensures grounding Rapid and complete static dissipation due to constant contact through...
More info
HG6020 – Full Coverage ESD Sole Grounders – Medium – 1Meg
Image
Full coverage sole grounders – 20 times the surface contact of heel grounders Wider and more consistent contact area ensures grounding Rapid and complete static dissipation due to constant contact through...
More info
HG6010 – Full Coverage ESD Sole Grounders – Small – 1Meg
Image
Full coverage sole grounders – 20 times the surface contact of heel grounders Wider and more consistent contact area ensures grounding Rapid and complete static dissipation due to constant contact through...
More info
HG6005 – Full Coverage ESD Sole Grounders – Extra Small
Image
Full coverage sole grounders – 20 times the surface contact of heel grounders Wider and more consistent contact area ensures grounding Rapid and complete static dissipation due to constant contact through...
More info
SC1207C – Disposable ESD Shoe Covers with Skid Resistant Bottoms
SC1207C - Disposable ESD Shoe Covers with Skid Resistant Bottoms
Disposable ESD Shoe Covers with Skid Resistant Bottoms are an effective line of defense that will keep your devices, products, and environments safe from static damage and contamination from foot...
More info
SC50BS Series – ESD Washable Cleanroom Shoe Covers
ESD Washable Cleanroom Shoe Covers
The SC50BS Series: ESD Washable Cleanroom Shoe Covers with ESD Rubber Soles and Conductive Grounding Ribbons are an economical way to maintain cleanliness and ESD protection in controlled in environments...
More info
WB1637 Single Wire Wrist Band & Coil Cord Set – 6ft, 4mm snaps
Image
ESD Protection: The WB1637 wrist strap is a durable and long-lasting method of grounding personnel Comfortable: Made with a soft woven fabric that is comfortable to wear for long periods Hypoallergenic:...
More info
WB1643 Single Wire Wrist Band & Coil Cord Set – 12ft, 4mm snaps
Image
ESD Protection: The WB1643 wrist strap is a durable and long-lasting method of grounding personnel Comfortable: Made with a soft woven fabric that is comfortable to wear for long periods Hypoallergenic:...
More info
WB2637 – Single Wire Wrist Band & Coil Cord Set – 6ft Coil Cord with a 4mm snap size
Image
Comfortable: Made with a soft woven fabric that is comfortable to wear for long periods Hypoallergenic: The fabric band uses hypoallergenic silver-plated nylon thread (for conductivity) which will not irritate your skin...
More info
WB2643 – Single Wire Wrist Band & Coil Cord Set – 12ft Coil Cord with a 4mm snap size
Image
Comfortable: Made with a soft woven fabric that is comfortable to wear for long periods Hypoallergenic: The fabric band uses hypoallergenic silver-plated nylon thread (for conductivity) which will not irritate your skin...
More info
WB4016 Wrist Band – 4mm Snap
Image
Comfortable: Made with a soft woven fabric that is comfortable to wear for long periods ESD Properties: Uses highly conductive copper sulfide nylon thread for conductivity and it has a maximum resistance...
More info
WB4037 Wrist Band & Coil Cord Set – 6ft Coil Cords; Machined 4mm Snap
Image
Comfortable: Made with a soft woven fabric that is comfortable to wear for long periods Machined Snap: Provides a more secure connection to the coil cord for greater reliability. ESD Properties: Uses highly...
More info
WB4043 Wrist Band & Coil Cord Set – 12ft Coil Cords; Machined 4mm Snap
Image
Comfortable: Made with a soft woven fabric that is comfortable to wear for long periods Machined Snap: Provides a more secure connection to the coil cord for greater reliability. ESD Properties: Uses highly...
More info
WB5026 Anti-Allergy Wrist Band – 4mm snap
Image
This Anti-allergy ESD wrist strap is the ideal grounding device for people with allergies to common metals. Anti-allergy:  No metal will make contact with the skin. Hypoallergenic: Made with Hypoallergenic...
More info
WB5643 Series Anti-Allergy Wrist Band & Coil Cord Set – 4mm snap, 12ft coil cord
Image
This Anti-allergy ESD wrist strap set with 12ft coil cord is the ideal grounding device for people with allergies to common metals. Anti-allergy:  No metal will make contact with the...
More info
WB6037 – Metal Wrist Band & Coil Cord Set – Metal Expansion Band; 6ft Cords
Image
The WB6037 ESD wrist strap set is a durable grounding device for industrial and controlled environments. Durable: The metal wrist band has a vastly longer working life than traditional fabric...
More info
WB6043 – Metal Wrist Band & Coil Cord Set – Metal Expansion Band; 12ft Cords
Image
The WB6043 ESD wrist strap set is a durable grounding device for industrial and controlled environments. Durable: The metal wrist band has a vastly longer working life than traditional fabric...
More info
WB8037 Wrist Band & Coil Cord Set – Fabric Clasp band; 6ft coil cords
Image
The WB8037 ESD wrist strap set is a comfortable ESD grounding device for industrial and controlled environments. Locking Clasp: The wrist band features a unique locking clasp that eliminates excess band...
More info
WB8043 Wrist Band & Coil Cord Set Series -Fabric Clasp band; 12ft cords
Image
The WB8043 ESD wrist strap set is a comfortable ESD grounding device for industrial and controlled environments. Locking Clasp: The wrist band features a unique locking clasp that eliminates excess band...
More info
WB1738 Single Wire Wrist Band & Coil Cord Set – 6ft, 7mm snaps
Image
Comfortable: Made with a soft woven fabric that is comfortable to wear for long periods Hypoallergenic: The fabric band uses hypoallergenic silver-plated nylon thread (for conductivity) which will not irritate...
More info
WB1744 Single Wire Wrist Band & Coil Cord Set – 12ft, 7mm snaps
Image
ESD Protection: The WB1744 wrist strap is a durable and long-lasting method of grounding personnel. Comfortable: Made with a soft woven fabric that is comfortable to wear for long periods Hypoallergenic:...
More info
WB1839 Single Wire Wrist Band & Coil Cord Set – 6ft, 10mm snaps
Image
ESD Protection: The WB1839 wrist strap is a durable and long-lasting method of grounding personnel. Comfortable: Made with a soft woven fabric that is comfortable to wear for long periods Hypoallergenic:...
More info
WB1845 Single Wire Wrist Band & Coil Cord Set – 12ft, 10mm snaps
Image
ESD Protection: The WB1845 wrist strap is a durable and long-lasting method of grounding personnel. Comfortable: Made with a soft woven fabric that is comfortable to wear for long periods Hypoallergenic:...
More info
WB0016 Single Wire Blue ESD Wrist Band 4mm snaps – Blue
Image
ESD Protection: Versatile blue ESD wrist strap that is a durable and long-lasting method of grounding personnel. Works with most standard single wire 4mm coil cords. Comfortable: Made with a soft...
More info
WB0026 Single Wire Maroon ESD Wrist Band 4mm snaps – Maroon
Image
ESD Protection: Versatile blue ESD wrist strap that is a durable and long-lasting method of grounding personnel. Works with most standard single wire 4mm coil cords. Comfortable: Made with a soft...
More info
WB0017 Single Wire Wrist Band 7mm snaps – Blue
Image
Comfortable: Made with a soft woven fabric that is comfortable to wear for long periods Hypoallergenic: The fabric band uses hypoallergenic silver-plated nylon thread (for conductivity) which will not irritate...
More info
WB0018 Single Wire Wrist Band 10mm snaps – Blue
WB0018 ESD Wrist Strap
Comfortable: Made with a soft woven fabric that is comfortable to wear for long periods Hypoallergenic: The fabric band uses hypoallergenic silver-plated nylon thread (for conductivity) which will not irritate...
More info
WB9000 Series Metal Wrist Band & Coil Cord Set – Metal expansion band; 6ft, 12ft cords
Image
Durable metal expansion wrist band  Insulating outer surface and stainless steel inner surface Comes with a 6ft, 12′, 20′ coil cord or as a band only Small, Medium, Large or...
More info
WB5407 Disposable Wrist Band
Image
Designed for one-time use – Perfect for guests, field service calls, or to be shipped with ESD sensitive products Packaged individually in a printed bag with instructions – in packs of...
More info
WB2585 Dual Wire Wrist Band & 12ft Coil Cord Set
Image
SAFE: A dual-wire wrist strap set provides fail-safe ESD protection because it has two paths-to-ground.  If one wire is broken, the second wire will maintain the connection to ground. DESIGN:...
More info
WB2580 Dual Wire Wrist Band & 6ft Coil Cord Set
Image
SAFE: A dual-wire wrist strap set provides fail-safe ESD protection because it has two paths-to-ground.  If one wire is broken, the second wire will maintain the connection to ground. DESIGN:...
More info
WB2695P Series Dual Conductor Metal Wrist Band and Coil Cord Set
Image
Adjustable one-size-fits-all fabric wrist strap with a 5ft coil cord Features a “One Snap” design with two 4mm snaps enclosed in a molded head. Provides a convenient parking jack for the...
More info
WB2695P10 – “One Snap” Dual Conductor Metal Wrist Band and 10ft Coil Cord Set
Image
Adjustable one-size-fits-all fabric wrist strap with a 10ft coil cord Features a “One Snap” design with two 4mm snaps enclosed in a molded head. Provides a convenient parking jack for the...
More info
WB2695P20 – “One Snap” Dual Wire Wrist Band and 20ft Coil Cord Set
Image
Adjustable one-size-fits-all fabric wrist strap with a 20ft coil cord Features a “One Snap” design with two 4mm snaps enclosed in a molded head. Provides a convenient parking jack for the...
More info
WB5200 Series Dual Conductor Metal Wrist Band and 20ft Coil Cord Set
Image
Premium metal expansion wrist strap with more reliable path-to-ground Durable metal band – Long wearing, easy to clean Superior contact with skin Dual-Wire conductor provides redundancy:  Even if one dual-wire wrist...
More info
WB5100 Series Dual Conductor Metal Wrist Band and 10ft Coil Cord Set
Image
Premium metal expansion wrist strap with more reliable path-to-ground Durable metal band – Long wearing, easy to clean Superior contact with skin Dual-Wire conductor provides redundancy:  Even if one dual-wire wrist...
More info
WB5050 Series Dual Conductor Metal Wrist Band and 5ft Coil Cord Set
Image
Premium metal expansion wrist strap with more reliable path-to-ground Durable metal band – Long wearing, easy to clean Superior contact with skin Dual-Wire conductor provides redundancy:  Even if one dual-wire wrist...
More info
WB3000 Series Magnetic Dual Conductor Fabric Wrist Band and Coil Cord Set
WB3000 Magnetic Wrist Strap Set
A premium one-size-fits-all adjustable fabric wrist strap and coil cord set The snaps are specially designed magnets which creates a superior electrical connection between the wrist strap and coil cords....
More info
WB7200 Series Dual Conductor Fabric Wrist Band and 20ft Coil Cord Set
Image
PREMIUM: A premium one-size-fits-most adjustable fabric wrist strap and 20ft coil cord set PROTECTION: Dual-Wire conductor provides redundancy:  Even if one dual-wire wrist strap wire is severed, the operator has...
More info
WB7100 Series Dual Conductor Fabric Wrist Band and 10ft Coil Cord Set
Image
PREMIUM: A premium one-size-fits-most adjustable fabric wrist strap and 10ft coil cord set PROTECTION: Dual-Wire conductor provides redundancy:  Even if one dual-wire wrist strap wire is severed, the operator has...
More info
WB7050 Series Dual Conductor Fabric Wrist Band and 5ft Coil Cord Set
Image
PREMIUM: A premium one-size-fits-most adjustable fabric wrist strap and 5ft coil cord set PROTECTION: Dual-Wire conductor provides redundancy:  Even if one dual-wire wrist strap wire is severed, the operator has...
More info
CC0045 Classic Straight Coil Cord: 12′ Length – 10mm Snap – Black
Image
Coil cords for grounding people and items in an ESD protected area. Length: 6′, extended or 12′, extended Snap Size: 4 mm, 7mm and 10mm Resistor: 1 meg ohm standard, 270K...
More info
CC0039 Classic Straight Coil Cord: 6′ Length – 10mm Snap – Black
Image
Coil cords for grounding people and items in an ESD protected area. Length: 6′, extended or 12′, extended Snap Size: 4 mm, 7mm and 10mm Resistor: 1 meg ohm standard, 270K...
More info
CC0044 Classic Straight Coil Cord: 12′ Length – 7mm Snap – Black
Image
Coil cords for grounding people and items in an ESD protected area. Length: 6′, extended or 12′, extended Snap Size: 4 mm, 7mm and 10mm Resistor: 1 meg ohm standard, 270K...
More info
CC0037 Classic Straight Coil Cord: 6′ Length – 4mm Snap – Black
Image
Coil cords for grounding people and items in an ESD protected area. Length: 6′, extended or 12′, extended Snap Size: 4 mm, 7mm and 10mm Resistor: 1 meg ohm standard, 270K...
More info
CC0038 Classic Straight Coil Cord: 6′ Length – 7mm Snap – Black
Image
Coil cords for grounding people and items in an ESD protected area. Length: 6′, extended or 12′, extended Snap Size: 4 mm, 7mm and 10mm Resistor: 1 meg ohm standard, 270K...
More info
CC0043 Classic Straight Coil Cord: 12′ Length – 4mm Snap – Black
Image
Coil cords for grounding people and items in an ESD protected area. Length: 6′, extended or 12′, extended Snap Size: 4 mm, 7mm and 10mm Resistor: 1 meg ohm standard, 270K...
More info
CC3200R Dual Conductor Right Angle Coil Cord – 20′ Length
CC3000R Dual Wire Coil Cord
Dual Conductor Coil Cord: If one conductor is damaged, the operator will maintain the path-to-ground through the other conductor. Length:  Coil cord is 20ft long extended Plug: 3.4mm right angle mono...
More info
CC3100R Dual Conductor Right Angle Coil Cord – 10′ Length
CC3000R Dual Wire Coil Cord
Dual Conductor Coil Cord: If one conductor is damaged, the operator will maintain the path-to-ground through the other conductor. Length:  Coil cord is 10ft long extended Plug: 3.4mm right angle mono...
More info
CC3050R Dual Conductor Right Angle Coil Cord – 5′ Length
CC3000R Dual Wire Coil Cord
Dual Conductor Coil Cord: If one conductor is damaged, the operator will maintain the path-to-ground through the other conductor. Length:  Coil cord is 5ft long extended Plug: 3.4mm right angle mono...
More info
CC3920 ESD Grounding Cable with Alligator Clip Banana Plug and USA Outlet Plug, with Alligator Clip, 20ft Long
ESD Grounding Cable with Alligator Clip
20 FT LONG GROUND CABLE ALLIGATOR CLIPS– The grounding cord is 20 feet long which can work with many applications such as earthing mats, shoes, pc, gloves, computer, half sheet,...
More info
CC9020 Series Premium Straight Coil Cords Series: 20′ Long – 4mm Snap
Image
RELIABLE: Durable 20ft ESD coil cords with a universally solid connection to standard 4mm wristbands for grounding people and items in an EPA Snap: Includes an universally solid 4mm snap...
More info
CC9043 Premium Straight Coil Cords Series: 12′ Long – 4mm Snap
Image
Premium Straight Coil Cords 4mm Snap Length: 12′, extended Resistor: 1 meg ohm Flex Life: > 50,000 flexes Color: Black Banana: Swivel type...
More info
CC9037 Series Premium Straight Coil Cords Series: 6′ Long – 4mm Snap
Image
Premium Straight Coil Cords 4mm Snap Length: 6′, extended Resistor: 1 meg ohm Flex Life: > 50,000 flexes Color: Black Banana: Swivel type...
More info
CC9043R Premium Right Angle Coil Cord: 12′ Length – 4mm, Snap – Black
Image
12ft Right Angle ESD Coil Cord are for grounding people and items in an ESD protected area or for earthing. Length: 6′,12′, extended Resistor: 1 meg ohm Flex Life: > 50,000...
More info
CC9037R Premium Right Angle Coil Cord: 6′ Length – 4mm, Snap – Black
Image
6ft Right Angle ESD Coil Cord are for grounding people and items in an ESD protected area or for earthing. Length:6′, extended Resistor: 1 meg ohm Flex Life: > 50,000...
More info
CC3200 Dual Conductor Coil Cord – 20′ length
Image
Dual Conductor Coil Cord: If one conductor is damaged, the operator will maintain the path-to-ground through the other conductor. 3.4mm straight mono plug One megohm series resistor Superior resistor connection strain...
More info
CC3100 Dual Conductor Coil Cord – 10′ length
Image
Dual Conductor Coil Cord: If one conductor is damaged, the operator will maintain the path-to-ground through the other conductor. 3.4mm straight mono plug One megohm series resistor Superior resistor connection strain...
More info
CC3050 Dual Conductor Coil Cord – 5′ length
Image
Dual Conductor Coil Cord: If one conductor is damaged, the operator will maintain the path-to-ground through the other conductor. 3.4mm straight mono plug One megohm series resistor Superior resistor connection strain...
More info
CC2695P-20 One Snap Dual Wire Coil Cord with Parking Jack: 20′ Length
Image
“One Snap” Dual Wire Design Contains Two Snaps in a Molded Head Innovative Parking Jack To Hold Coil Cord Plug For Use with Dual Wire Resistance Constant Monitors Length: 5′,...
More info
CC2695P-10 One Snap Dual Wire Coil Cord with Parking Jack: 10′ Length
Image
“One Snap” Dual Wire Design Contains Two Snaps in a Molded Head Innovative Parking Jack To Hold Coil Cord Plug For Use with Dual Wire Resistance Constant Monitors Length: 5′,...
More info
CC2695P-5 One Snap Dual Wire Coil Cord with Parking Jack: 5′ Length
Image
“One Snap” Dual Wire Design Contains Two Snaps in a Molded Head Innovative Parking Jack To Hold Coil Cord Plug For Use with Dual Wire Resistance Constant Monitors Length: 5′,...
More info
CC2085 Two Snap Dual Wire Coil Cord: 12′ Length – 4mm
Image
Two Snap Dual Wire 6ft Coil Cord with two 4mm snaps for use with dual wire constant monitors. Length: 6′, extended Resistor: 1 meg ohm Flex Life: > 20,000 flexes...
More info
CC2080 Two Snap Dual Wire Coil Cord: 6’Length – 4mm
Image
Two Snap Dual Wire 6ft Coil Cord with two 4mm snaps for use with dual wire constant monitors. Length:  12′, extended Resistor: 1 meg ohm Flex Life: > 20,000 flexes...
More info
CC3000NRS Interconnect Two Banana Cord with No Resistor
CC3000NRS-straight-cord
Cord use to connect two items together Each end terminates with a standard banana plug Length: 8′ Resistor: No Resistor. Flex Life: > 50,000 flexes Color: Black Banana: Swivel type...
More info
CC3000NR Interconnect Two Banana Coil Cord with No Resistor
Image
Cord use to connect two items together Each end terminates with a standard banana plug Length: 8′ Resistor: No Resistor. Flex Life: > 50,000 flexes Color: Black Banana: Swivel type...
More info