PGT120 ESD Tester

The PGT AccessPRO verifies the functionality of an operator’s wrist strap and footwear, logs the test results, and controls access to an ESD Protected Area.

• ESD Testing: The PGT120 tests the operators path-to-ground and indicates that the wrist strap and footwear are functioning properly
• Data Logging: All operator test activity is logged into a database to meet the ANSI/ESD S20.20 requirement
• Important Information: Each log entry includes operator identification, test results, resistance measurements, time, temperature and humidity.
• Employee Identification: Operator identification can be performed by RFID, Barcode or Keypad.  The system supports USB equipment so current ID systems may be used.
• High-Quality Turnstile: The FastPass Turnstile controls access to the ESD Protected Area. The USA made turnstile designed for high traffic/volume applications.

• TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem
• INTELLIGENT: A “Smart” ESD Combo tester that integrates with a computer to record test results into a database
• DATA TERMINALS: Requires the one of three Data Terminal to record data: DataTerminal2, DataTerminal3 with RFID reader and TC18 Touch Screen Computer.
• PLUG AND PLAY: Can work with many other USB devices such as label printer, RFID reader, card reader, keypad, light signal, bar code scanner and more
• HANDS-FREE: Automatically test footwear in hands-free mode
• ACCURATE: Uses a 100volt test circuit (by default) which is the same voltage used for qualification tests.  Adjustable to 30 or 50volts as well.
• BARRIERS: The PGT120.COM can integrate with a door/barrier system and trigger the barrier to open with a PASS test. Interested in a Turnstile? Learn more about our AccessPRO turnstile system.

• TESTING: Independently test the functioning of ESD footwear & wrist strap grounding products and signals if there is a problem
• HANDS-FREE: Automatically test footwear in hands-free mode
• SIGNALS: Audibly and visually signal a “Pass”, “High-Fail” or “Low-Fail”
• TIME SAVE: Tests both feet simultaneously and independently to save time
• ACCURATE: Uses a 100volt test circuit (by default) which is the same voltage used for qualification tests.  Adjustable to 30 or 50volts as well.
• BARRIERS: The PGT120 can integrate with a door/barrier system and trigger the barrier to open with a PASS test. Interested in a Turnstile? Learn more about our AccessPRO turnstile system.

• Data Logging: Turns the PGT120.COM tester into a “Smart” ESD Combo tester that integrates with a computer to record test results into a database.
• Access:  Test information can be accessed from a Web Interface on any computer on the network as well as from a dedicated database via the DataTERM software on a single PC. Multiple PGT120.COM stations can be networked together and information stored in a single location.
• Plug and Play: Supports USB accessories such as Printers, HID devices, Signal Lamps, Temp/Humidity Sensors
• User Identification: User identification with any USB HID input device (RFID, Barcode Scanner, Magnetic card swipe, Keypad).Existing identity cards or time attendance cards can be used*
• Barriers: An optional replay can trigger access systems such as turnstiles, doors, etc
• Must be used with the PGT120.COM tester from Wolfgang Warmbier

• Turns the PGT120.COM tester into a “Smart” ESD Combo tester that integrates with a computer to record test results into a database
• Touchscreen 10″ (capacitive)
• with integrated MiniPC (DATATerminal)
• LAN-Port RJ45
• 4 x USB2.0-Ports
• COM RS232 (DATA Port for PGT120.COM)
• Power supply: AC 100-240V 50-60Hz / DC 12/5A
• Housing: Aluminium, silver
• Dimension: 288 x 231 x 58 mm
• Mounting: Front-panel and VESA 57x75mm / 100x100mm
• Ready to integrate into existing infrastructure
• Multiple PGT120.COM stations can be networked
• Existing identity cards or time attendance cards can be re-used
• Open database interface
• Measurement data is ready to process after a few seconds
• Various databases can be used
•  Combination with existing access systems is possible
• Secure network communication
• Must be used with the PGT120.COM tester from Wolfgang Warmbier

• Turns the PGT120.COM tester into a “Smart” ESD Combo tester that integrates with a computer to record test results into a database
• Built-in RFID reader that can be used for employee information
• Existing identity cards or time attendance cards can be used*
• Multiple PGT120.COM stations can be networked
• Can work with existing access systems such as turnstiles, doors, barriors
• Secure network communication
• Must be used with the PGT120.COM tester from Wolfgang Warmbier

• The RFID Reader works with the PGT120.COM and allows employees to submit user IDs and other information from Company ID Cards during testing
• For use with the Wolfgang Warmbier PGT120.COM & Data Terminal Series Systems.
• Our RFID reader can work with many different types of RFID cards.We can update the firmware on our reader to work with your card.  Please contact us for more information.
• Powered by USB

• The Facial Recognition System for use with the PGT120.COM and allows employees to submit user IDs: Face, Pin, RFID –  during testing of ESD products
• No-touch technology for a hygienic cost-saving process. Add additional levels of security and authentication to the facial recognition time clock by adding badge swipe and/or PIN entry.
• For use with the Wolfgang Warmbier PGT120.COM & Data Terminal Series Systems.
• Sleek, sloped design with wall mounting capability
• User Capacity: 4,000 employees
• Memory capacity: 200,000 data points and 200,000 security photos
• Specs: 4gb SD Card, Speaker, USB Port, Numeric Keypad, 3.5″ TFT Color Screen, RS232 Printer Port, TCP/IP

• Designed to facilitate easy, in-house, calibration verification of Wolfgang Warmbier PGT120 Series ESD Combo Testers
• Verify that testers calibrated to ANSI/ESD S1.1-1998 and ANSI/ESD STM9.1-2001 so it works with most makes of test equipment.
• With the rotation of the selector switch, the precision resistor box can check that the testers are calibrated.
• Passive – Does not require power