Testing Accessories

Showing all 17 results

Warmbier 7220.880.SET Concentric Ring Probe Model 880, with Carrying Case

The 7220.880.SET concentric ring probe is used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements. The
More Info
  • A concentric ring probe used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements.
  • Concentric ring with conductive rubber (R < 5 ohm) with silver particles
  • Take resistance-to-ground, point-to-point and volume resistance measurements
  • Include stainless steel plate, insulative plate, and a conductive carrying case

Add to quote

Warmbier 890 Two Sided Probe

The 890 two-side probe is two ESD testing probes in one: a 5lb disk probe and a concentric ring probe.   The 890 two-sided probe is used with a surface resistance meter to take volume
More Info
  • Two-sided probe combines a concentric ring and disk probe
  • Made with conductive plastic containing silver particles
  • Take resistance-to-ground, point-to-point and volume resistance measurements
  • Include stainless steel plate, insulative plate, and a conductive carrying

Add to quote

SR0065 5lb Surface Resistance Probes

5lb Disk Electrode Probes for use with Surface Resistance Meters Designed to test point-to-point (RTT) and point-to-ground resistance (RTG) in accordance with ESD Association Standards. The probe
More Info
  • 5lb disk electrode probes for use with Surface Resistance Meters
  • Designed to test point-to-point (RTT) and point-to-ground resistance (RTG) in accordance with ESD Association Standards.
  • Make measurements on floors, mats, workbenches, garments, seating or any other flat surface where the resistance between two points is required.
  • Compatible with most resistance meters.

 

Add to quote

Warmbier 7220.410 Two Point Probe

The Wolfgang Warmbier 7220.410 two-point probes measures point-to-point surface resistance of small areas The 7220.410 two-point probe are designed to measure surface resistance of small areas. The
More Info
  • Measures point-to-point surface resistance of small areas
  • Spring loaded contact pins.
  • Connects to meters with banana plugs
  • Works with the SRM110 and SRM200 surface resistance meters

Add to quote

Warmbier 7200.CL.49 Clamp Probes for Testing ESD Garments

olfgang-warmbier-7200.CL-49 ESD Garment-testing-clamp
The Wolfgang Warmbier 7200.CL.49 clamps probes are designed to evaluate ESD garments accounting ANSI ESD20.20 The 7200.CL.49 clamps probes are designed to evaluate ESD garments accounting ANSI
More Info
  • 7200.CL.49 clamps probes are designed to evaluate ESD garments accounting ANSI ESD20.20
  • Wide steel clamps ensures excellent contact with fabric
  • Made from rugged stainless steel
  • Banana plug socket for connection to the testing meter

Add to quote

Warmbier 7220.45 Hand Probes for Testing ESD Floors

wolfgang-warmbier-hand-probe-7220
The 7220.45 hand probes are designed to be used with resistance meters to evaluate ESD flooring according to ANSI ESD20.20. The probe is held in the hand and ensures excellent contact with skin while
More Info
  • Hand probe are designed to evaluate ESD flooring according to ANSI ESD20.20
  • Made from rugged stainless steel
  • Banana plug socket for connection to the testing meter
  • Compatible with Surface Resistance Meters and Walking Test Kits

Add to quote

Warmbier TF-530 Digital Thermo-Hygrometer

wolfgang-warmbier-7100-tf530-thermo-hygrometer-wolfgang-warmbier
The TF-530 measures temperature and humidity which are required during ESD testing. The TF-530 Digital Thermo-Hygrometer is an easy-to-read and economical way to track temperature and humidity
More Info
  • Take Precise Temperature and Humidity Measurements
  • One Button Operation
  • Mountable: Built-in 1/4” Tripod Thread
  • Temperature: -30…+70°C (± 0,5°C at -10…+70°C)
  • Humidity: 0 … 100% (± 3% at 20…80%)

Add to quote

Warmbier 900 Backrest Probe

Probe used to take accurate resistance measurements of ESD chairs. The 900 Backrest probe is designed to evaluate ESD chair back-rests according to ANSI ESD20.20. The clamp ensures excellent
More Info
  • Ensures Excellent Contact During Evaluations of ESD Chairs
  • Rugged Metal Probe
  • 4mm Banana Plug Socket Connection
  • For Use With Resistance Meters

Add to quote

Warmbier 7100.VB – Veribox

7100VB - Veribox From Warmbier
Verify That Your ESD Test Equipment are Operating Correctly with the Warmbier 7100.VB - Veribox. Warmbier 7100.VB - Veribox is for the periodic verification of ESD test equipment such as
More Info
  • For the Periodic Verification of ESD Testers
  • Contains Fixed Resistors: 1GΩ, 1MΩ, 10KΩ
  • Passive Device – Uses No Power
  • For Use With Most Available Resistance Meters

Add to quote

Warmbier 15 Glove Probe

Probe used to take accurate resistance measurements of ESD Gloves. Model# 15 Glove probe is designed to evaluate ESD gloves according to ANSI ESD20.20. The probe’s weight ensures excellent
More Info

Add to quote

Warmbier 7220.870.V.SET Extension Handle For Use with Probes

7220.870.v.set Probe Handle
Make testing floors easier with an extension handle for probes used to take resistance measurements. Model 7220.870.V.SET extension handle eliminates the need to bend to pick up and move ESD
More Info
  • Add Up To Three Feet to the Handle of ESD probes
  • Eliminates the need to Bend During Testing
  • Rugged Metal Design
  • Three Piece Consuction Allows it to be Packed Away
  • For Use With Resistance Meters

Add to quote

Warmbier 7100.2000.TR50 – 50ft Cable Reel

7100.200.TR50 50ft Cable Reel
Make testing floors easier with a 50ft cable reel used with probes to take resistance measurements over large areas. Warmbier 7100.2000.TR50 - 50ft Cable Reel allows you to take resistance
More Info
  • Make testing floors easier with a 50ft cable reel
  • Test Resistance Over a Larger Area
  • The Reel Easily Rolls Up The Cable for Storage
  • For Use With Most Available Resistance Meters

Add to quote

CAL1000 – Calibration Verification Device

CAL1000
The CAL1000 device is used to facilitate easy, in-house, calibration verification of most ESD testers and surface resistance meters. The CAL1000 is designed to verify that testers calibrated to
More Info
  • Verify ESD meters are calibrated and in proper working order
  • Precision resistor box
  • Passive – Does not require power
  • Verifies Transforming Technologies GTS600K, GTS900K, SRM310, SRM500K and many others.

Add to quote

PGT.XK.V3- RFID Card Reader for the PGT120.COM Tester

7100PGTXKV3-2 - RFID Reader
The RFID Reader allows employees to submit user IDs and other information from Company ID Cards during testing with the PGT120.COM combo testers. The RFID Reader reads and writes almost any 125
More Info
  • The RFID Reader works with the PGT120.COM and allows employees to submit user IDs and other information from Company ID Cards during testing
  • For use with the Wolfgang Warmbier PGT120.COM & Data Terminal Series Systems.
  • Our RFID reader can work with many different types of RFID cards.We can update the firmware on our reader to work with your card.  Please contact us for more information.
  • Powered by USB

Add to quote

SY910 – Facial Recognition System for the PGT120.COM Tester

SY910 Facial Recognition System
Facial Recognition for Workforce Management & ESD Testing Allows employees to submit user identifications such as Face, Pin, and RFIDs during testing with the PGT120.COM combo testers. This
More Info
  • The Facial Recognition System for use with the PGT120.COM and allows employees to submit user IDs: Face, Pin, RFID –  during testing of ESD products
  • No-touch technology for a hygienic cost-saving process. Add additional levels of security and authentication to the facial recognition time clock by adding badge swipe and/or PIN entry.
  • For use with the Wolfgang Warmbier PGT120.COM & Data Terminal Series Systems.
  • Sleek, sloped design with wall mounting capability
  • User Capacity: 4,000 employees
  • Memory capacity: 200,000 data points and 200,000 security photos
  • Specs: 4gb SD Card, Speaker, USB Port, Numeric Keypad, 3.5″ TFT Color Screen, RS232 Printer Port, TCP/IP

Add to quote

PGT120.CU- Calibration Verification Device

Verify that your PGT120 combo testers are calibrated and in working order. The PGT120.CU device is designed to facilitate easy, in-house, calibration verification of Wolfgang Warmbier PGT120
More Info
  • Designed to facilitate easy, in-house, calibration verification of Wolfgang Warmbier PGT120 Series ESD Combo Testers
  • Verify that testers calibrated to ANSI/ESD S1.1-1998 and ANSI/ESD STM9.1-2001 so it works with most makes of test equipment.
  • With the rotation of the selector switch, the precision resistor box can check that the testers are calibrated.
  • Passive – Does not require power

Add to quote

Translate »