Floor

Showing all 8 results

ComfortDOME ESD Anti-Fatigue Mats

fm5-comfort-dome-esd-anti-fatigue-mats

Energizing ComfortDOME anti-fatigue mat provides unparalleled comfort in areas where static is a concern

The ComfortDOME flooring system is a range of individual mats and modular flooring that offers a unique combination of proven ergonomic and heath benefits PLUS ESD protection. Available in single work area mats or in interlocking sections for long assembly lines.

ComfortDOMES

ComfortDOMES provide energizing responsiveness

ComfortDOMES
Evenly spaced ComfortDOMES on the conductive surface of the mat provides superior anti-fatigue relief because ComfortDomes get softer as compressed, not harder like products made with foam. ComfortDOMES recover/rebound more rapidly than most foam resulting in an energizing responsiveness not found in other mats.  ComfortDOMES function like a spring to return energy. The unique “air pocket” structure becomes softer as compressed. ComfortDOMES rebound instantly as weight is shifted.

Applications
ESD Anti-fatigue mats provide a path-to-ground for workers wearing ESD footwear as well as reduce worker discomfort from standing for long periods

Specification & Installation
Transforming Technologies guarantees that our ComfortDOME Anti-Fatigue Mats operate in the ideal conductive range – with surface resistance between two points (RTT) of 1.0 x 10^3 – 1.0 x 10^5 ohms. ComfortDOME Mats drain static charges efficiently and will act as part of the path-to-ground for an operator wearing ESD footwear. ComfortDOME matting should be installed and properly grounded to an approved and tested ground point. The mats do not require grounding when placed on an ESD floor that measures within the user’s specified limits. This mat can also work on a static dissipative floor without grounding. Proper cleaning and maintenance as well as ESD dissipative checks must be undertaken regularly to ensure the ongoing effectiveness of the ComfortDOME conductive surface.

Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1.

Anti-Fatigue mats increase productivity and worker moral

Why Ergonomic Anti-Fatigue Mats
Ergonomic matting is designed to work with the human body to ease the tasks that the body performs. In the case of a standing work station, anti-fatigue mats are of critical importance in reducing short-term fatigue and discomfortfrom standingfor long periods of time.These benefits also lead to real savings through increased productivity and worker moral, and decreases in sick leave, workers’ compensation claims and substandard production due to operators’ lack of concentration caused by fatigue.

Product Series

ItemDescriptionSales Unit
FM52X3Dome Anti-Fatigue Mat, 2' x 3'Each
FM53X4Dome Anti-Fatigue Mat, 3' x 4'Each
FM53X4EPDome Anti-Fatigue Mat, 3' x 4', Interlock, End PieceEach
FM53X4ICDome Anti-Fatigue Mat, 3' x 4', Interlock, Center PieceEach
More Info
Select options

ComfortTREAD Diamond-Plate Anti-Fatigue ESD Mat

fm9-comfort-treadesd-anti-fatigue-mats

ComfortTREAD ESD Runners quickly snap together to create ergonomic anti-fatigue floor with excellent traction. 

ComfortTREAD diamond-plate ESD anti-fatigue mats keep your workers comfortable and your ESD sensitive equipment safe.  The mat will not separate, bubble-up, ripple, tear, compress or lose resiliency. Available in interlocking sections which can be quickly dismantled to make moving and cleaning easy. Two FM9E connected creates a 2.5′ x5′ workstation mat or you can pair the two FM9E with any number of FM9C pieces to create a runner in 30” increments.

Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1

Diamond Plate Treads

Diamond Plate Treads

Our rubber ComfortTREAD mats are equipped with diamond-pattern surface treads. Thanks to this specialized design, our mats provide fantastic traction in work areas as well as large entryways, aisles, or other highly traveled areas. This regular pattern of raised diamonds imbue the industrial aesthetic and will provide anti-fatigue and slip protection for years.

comfort-tread-diamond-plate-anti-fatigue-honeycomb

Superior Anti-Fatigue Design

ComfortTREAD diamond-plate ESD anti-fatigue mats keep your workers comfortable and your ESD sensitive equipment. A fully molded honeycombed cell design absorbs shock and cushions the feet from constant contact with hard surfaces. The honeycomb design creates responsive columns with air pockets that get softer when compressed, not harder like solid vinly matting. The rubber is a flexible, elastic material that dampens and absorbs vibration. It forms a protective rubber barrier between your floors and industrial equipment, heavy foot traffic, or other abrasive environments.

fm9-comfort-treadesd-anti-fatigue-mats-esd

ESD Protection You Can Count On

Transforming Technologies guarantees that our ComfortDOME Anti-Fatigue Mats operate in the ideal conductive range – with surface resistance between two points (RTT) of 1.0 x 10^3 – 1.0 x 10^5 ohms. ComfortDOME Mats drain static charges efficiently and will act as part of the path-to-ground for an operator wearing ESD footwear. ComfortDOME matting should be installed and properly grounded to an approved and tested ground point. The mats do not require grounding when placed on an ESD floor that measures within the user’s specified limits. This mat can also work on a static dissipative floor without grounding.

More Info
Select options

VinylStat FM2 ESD Anti-Fatigue Floor Matting

fm2-esd-sponge-anti-fatigue-mat

VinylStat FM2 anti-fatigue matting provides a cushioning anti-fatigue surface to stand as well as grounding the person at the same time.

VinylStat FM2 is constructed with a closed-cell expanded PVC that results in a cushioning spongy surface and provides a path-to-ground for electrostatic charges. The mat is available in standalone workstation mats or in 60ft rolls in Brown or Gray. Worker fatigue has been shown to lower productivity and morale which has a large impact on profitability. Damage due to static can have a similar drain on the bottom line – Solve both problems with the VinylStat FM2 anti-fatigue matting.

Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD 4.1.

Product Numbers

Part NumberDescriptionSales Unit
FM22436BESD Anti-Fatigue Mat, Sponge Vinyl, Brown, 3/8" x 2' x 3'Each
FM22436GYESD Anti-Fatigue Mat, Sponge Vinyl, Gray, 3/8" x 2' x 3'Each
FM23660BESD Anti-Fatigue Mat, Sponge Vinyl, Brown, 3/8" x 3' x 5'Each
FM23660GYESD Anti-Fatigue Mat, Sponge Vinyl, Gray, 3/8" x 3' x 5'Each
FM224720BNESD Anti-Fatigue Mat, Sponge Vinyl, Full Roll, Brown, 3/8" x 2' x 60'Each
FM224720GYESD Anti-Fatigue Mat, Sponge Vinyl, Full Roll, Gray, 3/8" x 2' x 60'Each
FM236720BNESD Anti-Fatigue Mat, Sponge Vinyl, Full Roll, Brown, 3/8" x 3' x 60'Each
FM236720GYESD Anti-Fatigue Mat, Sponge Vinyl, Full Roll, Gray, 3/8" x 3' x 60'Each
FM248720BNESD Anti-Fatigue Mat, Sponge Vinyl, Full Roll, Brown, 3/8" x 4' x 60'Each
FM248720GYESD Anti-Fatigue Mat, Sponge Vinyl, Full Roll, Gray, 3/8" x 4' x 60'Each
Custom Sizes AvailableContact Transforming Technologies for More InformationPhone: 419-841-9552

 

More Info
Select options

VinylSTAT FM7 ESD Conductive Chair Mats and Floor Runners

fm7-esd-conductive-chair-mat-for-offices-with-chair-symbol

The perfect solution for grounding chairs or carts in an industrial or manufacturing environment.

The VinylSTAT FM7 is made of a rigid conductive vinyl that protects carpets from wear and tear while providing a path-to-ground for static charges. The ESD properties of the matting are permanent and are unaffected by damage caused by moving furniture.  The material is also an excellent floor runner for general uses.

The FM7 mats are made from a single layer of conductive vinyl, 0.090” thick, die cut with a lip to fit under typical desks. Runners in various lengths and full 75′ long rolls are also available.  The surface resistivity of the matting is 10^3 – 10^6. Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1.

Part Numbers

ItemDescriptionSales Unit
FM72448ESD Conductive Vinyl Runner, 24"x48", with hardwareEach
FM73648ESD Conductive Vinyl Runner, 36"x48", with hardwareEach
FM74872ESD Conductive Vinyl Runner, 48"x72", with hardwareEach
FM7CHAIRESD Conductive Chair Mat, Black 46” x 50”, with hardwareEach
FM73X75ESD Conductive Vinyl Roll, Black 3' x 75'Each
FM74X75ESD Conductive Vinyl Roll, Black 4' x 75'Each

Outstanding ESD Properties

The VinylSTAT FM7 mat is made with permanently conductive PVC with a resistance of 10^3 – 10^5Ω. The homogeneous distribution of carbon black give this mat a continuous and permanent path to ground. Electrical properties are impervious to wear so the conductive circuit remains unbroken while guarding against scratching and scuff marks.  The mats do not need to be grounded if placed on ESD floor which makes it a great product to extend the life and appearance of ESD coated floors.

Durability by Design

Floor matting can take a beating in industrial environments – wear and tear as well as discoloration due to contamination is common. The VinylSTAT FM7 mats are made with incredibly durable PVC, which can withstand rolling chairs, charts and general foot traffic with ease. The mats will not soak up liquids and is very easy to clean with water or an approved ESD cleaner.  The black color helps by hiding dirt in between washes.

Sizes are All Occasions

Not all needs are made equal. So we provide the VinylSTAT FM7 mats in a variety of sizes workstation mats as well as bulk material in rolls.  All of our cut mats come with ESD grounding hardware – snaps and a 15ft ground cord which easily installs to ground (commonly the center screw of an outlet).  We also provide the material in 75′ rolls so that you can create long runners or cut the material yourself to save money.  Contact Transforming Technologies for mat sizes not listed  – we may be able to cut a custom size for you.

More Info Select options

ComfortGEL Cleanroom Gel Foam Anti-Fatigue Mats

fm6-comfort-gel-esd-anti-fatigue-mats-black

ComfortGEL ESD Anti-Fatigue Mats provides maximum softness and cushioning while 

Transforming Technologies ComfortGEL ESD Anti-Fatigue mat prevents worker fatigue in controlled environments. This non-slip, water resistant mat is constructed from a close cell rubberized gel foam which provides an exceptionally high level of performance and comfort. The ComfortGEL anti-fatigue mats can be cleaned to clean room level100 by request. Made from specially formulated antimicrobial and antibacterial material to promote cleanliness.

Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1.

Comfort Innovation

ComfortGEL is a blend of durable rubberized gel foam designed especially for extreme ergonomic comfort.  The 5/8″ thick matting compresses and expands easily to create an energizing surface to stand on.  These foam anti-fatigue mats are ideal in environments where traditionally much heavier and bulkier mats are used for durable anti-fatigue such as: assembly lines, workstations, manufacturing, laboratories, and even home workshops.

Perfect for "Clean" Applications

ComfortGEL matting is made with antibacterial technology which helps minimize the growth of bacteria.This non-slip, water resistant mat is constructed from a close cell rubberized gel foam which allows the mat to be washable (to a cleanroom class). Open cell foam contains bubbles that are interconnected to each other in a wide web. A kitchen sponge is an example of open cell foam. Open cell foam can be soft but it will absorb any liquid it comes in contact with. ComfortGEL molded closed cell foam is not connected, one cell to another.Each cell is discrete which prevents absorption. This includes liquids, bacteria or blood-borne pathogens making it a great choice for “clean” applications.

Product Numbers

ItemDescriptionSales Unit
FM62036BKComfortGEL ESD Anti-Fatigue Mat, Washable, 20" x 36", BlackEach
FM62436BKComfortGEL ESD Anti-Fatigue Mat, Washable, 24" x 36", BlackEach
FM66036BKComfortGEL ESD Anti-Fatigue Mat, Washable, 60" x 36", BlackEach

More Info
Add to cart

Add to quote

GrooveSTAT Conductive Ribbed Rubber Matting

fm10-conductive-v-groove-rubber-mat

This conductive ESD floor runner has a non-slip, grooved surface that provides excellent traction and allows the mat to be easily cleaned.

A ribbed emboss provides a non-slip surface that provides excellent traction and allows the mat to be easily cleaned. The ribbed matting is also very resilient, allowing it to stand up to heavy foot traffic while still maintaining its ESD protection. The material also offers moderate chemical resistance. The matting is 1/8″ thick matting is available in 4’x32′ rolls and an assortment of lengths. The Transforming Technologies GrooveSTATTM Conductive Rubber Matting provides the electrical properties specified by ESDA standards for floor mats. Most common ESD runners available are made with dissipative vinyl, which does not comply with ESD standards.

 

Rubber runners create a barrier to cold flooring substrates and can also quiet footsteps over noisy tiled areas. Corrugated rubber matting can also be used as a liner for maintenance and tool carts.

Meets or exceeds requirements of ANSI ESD-S20.20 and the recommendations of ESD STM7.1

ItemDescriptionSales Unit
FM102448Conductive Rubber V-groove Floor Mat, With Hardware, 2'x4'Each
FM103648Conductive Rubber V-groove Floor Mat, With Hardware, 3'x4'Each
FM104872Conductive Rubber V-groove Floor Mat, With Hardware, 4'x6'Each
FM104X32Conductive Rubber V-groove Floor Mat, Full Roll, 4'x32'Each
More Info
Select options

PV Series Industrial ESD Interlocking Tile Floor Mats

pv-industrial-esd-floor-tile

Low-compression ESD floor tiles for industrial environments.

The PV Series Comfort matting is structurally robust and is capable of tolerating the heavy loads and harsh conditions associated with industrial environments while providing a comfortable, ESD- safe area for people required to stand for long periods of time. Safety ramp edging, in matching black or high visibility yellow, ensures a safer transition to and from the ESD work area.

Exceptional Comfort

The PVC tiles incorporate a unique under structure of “compression columns” which act as springs when weight is applied to counter the negative effects of impact or standing for prolonged periods. This ergonomic concept has been shown to significantly increase user comfort so not only will your static sensitive products be protected, your work force will be as well.

Easy Installation of ESD Flooring

The interlocking design makes the flooring simple to install and easy to configure. The professional look and functional safety of installations is completed with black or high-visibility yellow, non-ESD safety ramp edging that locks on to the modular tiles. Grounding wires and other cabling can be installed under the tiles.

Easy Cleaning

The PV Series flooring can be cleaned like most other flooring surfaces – by sweeping, vacuuming and washing. A mixture of 30% distilled water and 70% isopropyl alcohol, sprayed on and wiped with a clean cotton cloth removes dirt build-up.

 

More Info
Add to cart

Add to quote