Model Number |
Type |
Specs. |
|
Common Pt. Ground (CPT) Cord
The CP1500 series CPT ground cord provides a solid path to ground for up to two wrist straps and esd work surface.
|
|
CP1500 Series |
|
|
Field Service Common Pt. Ground (CPT)
The CP1518BD is designed for use with a field service kit. A large bull dog clip allows connection to grounded materials.
-
15' straight
cord with a 1 Meg resistor.
-
Bulldog Clip allows for grounding in Field where no snaps are available.
-
10 mm Female Snap.
|
|
CP1518BD |
|
|
Low Profile Common Pt. Ground (CPT)
The CP2500 series has a low profile molded head that provides a solid connection to ground and accepts two standard banana plugs.
-
15' straight
cord with a 1 Meg resistor.
-
Reduce profile head with two banana jack receptacles for wrist strap grounding.
-
Uses 10 mm Snap that comes in Male or Female.
|
|
CP2500 Series |
|
|
Metal Bench Mount Common Point Ground (CPT)
The CP4070 Metal Bench Mount Common Point Ground (CPT) offers the common ground point required by ANSI/ESD S-6.1 and ANSI/ESD-S20.20. The metal enclosed box mounts under front edge of workstation. Includes a 15′ long ground cable with #10 ring terminal connector. Two banana jack receptacles for secure ground connections. Two parking studs (4mm) for storing cords when not in use.
- Dual bench ground mount for single wire wrist straps.
- Mounts under workbench and can ground two operators.
|
|
CP4070 |
|
 |
Low Profile Floor Mat Ground
The FM1500 series is a low profile cord that grounds floor mats or work surfaces. A molded mushroom cap reduces concern of tripping hazards.
- 15' straight cord with a 1Meg resistor.(No resistor available)
- Molded low profile head to reduce potential trip hazards.
- 1/8" ring terminal to attach to grounding point.
- Available in Male or Female Snaps.
|
|
FM1500 Series |
|
 |
Low Profile Floor Mat Ground
The FM1500 series is a low profile cord that grounds floor mats or work surfaces. A molded mushroom cap reduces concern of tripping hazards
- 10mm male center snap used for standard field service kits
- The wrist strap cord section is 10 ft. (3.0 m)
- ground cord section 5 ft. (1.5 m).
- Each contains a 1 meg ohm resistor.
- Molded low profile head to reduce potential trip hazards.
|
 |
FM2000 |
|
|
Push and Clinch Snaps - Male and Female
Pronged 10mm sockets or 10mm studs. Easily installs onto multi-layer rubber or vinyl. Provides a strong contact for table matting
- 10mm male studs or female sockets
- Perfect for grounding worksurface or floor matting
|
|
CS1010 & CS1020 |
|
|
Universal Snap Kit
Fast and easy way to install 10mm snaps or studs to soft work station materials. Includes 2 screws (floor and table mat lengths). 1 each: 10mm socket, 10mm stud, washer and screw base.
-
Install 10mm snaps or studs to ESD work station materials. Includes 2 screws (floor and table mat lengths).
-
1 each: 10mm socket, 10mm stud, washer and screw base.
|
|
CS1090 |
|
 |
Alligator Clip
- High quality clip for grounding wrist straps
- Connects to a standard banana plug.
|
NA |
AC1000 |
